Yea and its written on old world Hebrew too.
Search found 1354 matches
- Thu Feb 17, 2022 3:15 pm
- Forum: Engine Tech
- Topic: Profilometer Info Needed
- Replies: 28
- Views: 2938
Re: Profilometer Info Needed
- Mon Feb 07, 2022 10:03 am
- Forum: Engine Tech
- Topic: Profilometer Info Needed
- Replies: 28
- Views: 2938
Re: Profilometer Info Needed
There are only a few models that with do the Rk, Rpk and Rvk values, make sure you get one that has this feature. If you buy one and cant get it setup I can help you out with that.
Keith
Keith
- Mon Nov 29, 2021 3:31 pm
- Forum: Engine Tech
- Topic: Bushed & indexed lifter bores = power improvement?
- Replies: 5
- Views: 1047
- Thu Nov 11, 2021 12:58 pm
- Forum: Engine Tech
- Topic: How much to flow heads
- Replies: 91
- Views: 7815
Re: How much to flow heads
I get $100 to do one intake and 1 exhaust, that includes Air speed if the customer wants it and a print out of the test. I change a little more if they want CSA measured at the 3 normal spots.
- Thu Nov 04, 2021 10:27 am
- Forum: Engine Tech
- Topic: Relocating Crank Thrust
- Replies: 30
- Views: 2675
Re: Relocating Crank Thrust
I am getting tooled up to do this on a LS based engine, but I have not machined one yet. A picture of the engine and crank would probably help so we can see what you are working with.
- Thu Oct 07, 2021 7:02 am
- Forum: Shop Equipment - For Sale or Wanted
- Topic: Wanted Sunnen dial bore gage parts
- Replies: 0
- Views: 858
Wanted Sunnen dial bore gage parts
Looking to buy broken, busted non-working Sunnen dial bore gages, also any related part, tips, wrenches, etc.
PM me here, or call 717-252-4293.
Thanks
PM me here, or call 717-252-4293.
Thanks
- Mon Aug 03, 2020 7:04 am
- Forum: Race Cars & Parts - For Sale or Wanted
- Topic: Wanted
- Replies: 0
- Views: 655
Wanted
I am looking for a set of New, or like new Speed Pro L2242NF pistons in .040 over, would consider .060 over. I know I can get new ones, just taking a stab that someone may have a set on the shelf they may never use and want to get rid of. Thanks, Keith
- Wed May 13, 2020 12:02 pm
- Forum: Engine Tech
- Topic: KB Claimer pistons
- Replies: 19
- Views: 3517
Re: KB Claimer pistons
No they are not that bad. I used these pistons since they came out. I never had one break where something out side did not break them. Incorrect ring gap, detonation etc. I had half dozen customers spray them with a 200 shot, not one broken piston.
Keith
Keith
- Tue Feb 18, 2020 7:13 am
- Forum: Engine Tech
- Topic: Any PSI Valve Spring Dealers Here?
- Replies: 6
- Views: 1045
Re: Any PSI Valve Spring Dealers Here?
https://motorsportsunlimited.net/
This is who I would call if you are a professional builder. I am not sure of he sells to the general public or not.
This is who I would call if you are a professional builder. I am not sure of he sells to the general public or not.
- Fri Jan 10, 2020 2:53 pm
- Forum: Engine Tech
- Topic: Heavy Metal Installation
- Replies: 11
- Views: 1763
Re: Heavy Metal Installation
Are you installing it radially? or through the counter weight? When I install radially I like .0015 to .0020 press.
If I go though the counterweight I am ok at .0010. but I always weld mine also.
If I go though the counterweight I am ok at .0010. but I always weld mine also.
- Wed Oct 30, 2019 7:42 am
- Forum: Engine Tech
- Topic: Shop with profilometer in the DC Metro/VA/MD/WV/DE area
- Replies: 9
- Views: 1447
Re: Shop with profilometer in the DC Metro/VA/MD/WV/DE area
I am located in York Pa, and I have a profilometer. Let me know if I can help.
717-252-4293
717-252-4293
- Mon Aug 26, 2019 2:53 pm
- Forum: Shop Equipment - For Sale or Wanted
- Topic: Extra BHJ Tooling for sale
- Replies: 14
- Views: 3740
Re: Extra BHJ Tooling for sale
How much for the BHJ "O" ring tooling?
Thanks
Thanks
- Tue Jun 04, 2019 7:48 am
- Forum: Race Cars & Parts - For Sale or Wanted
- Topic: Wanted, BBC 454 block
- Replies: 4
- Views: 7255
Re: Wanted, BBC 454 block
Where are you located?
I have a nice Gen 5 block that I standard bore and I believe it will clean at .0020 over, but I would need to bore gage it to make sure.
It does need a line hone.
Keith
I have a nice Gen 5 block that I standard bore and I believe it will clean at .0020 over, but I would need to bore gage it to make sure.
It does need a line hone.
Keith
- Mon Apr 15, 2019 8:41 pm
- Forum: Shop Equipment - For Sale or Wanted
- Topic: PETERSON MAGNAFLUX MACHINE w UV LIGHT, RING - OIL BASED
- Replies: 7
- Views: 5452
Re: PETERSON MAGNAFLUX MACHINE w UV LIGHT, RING - OIL BASED
Bossman, where are you located?
- Fri Oct 05, 2018 6:36 am
- Forum: Shop Equipment - For Sale or Wanted
- Topic: Sunnen CK 4000 Parts and Stones
- Replies: 2
- Views: 1985
Re: Sunnen CK 4000 Parts and Stones
Where are you at in PA?