Anyone worked on a Trick Flow SBC?

user-9274568 · Post by **user-9274568** » Wed May 11, 2005 12:06 am

Anyone know the as cast CSA on this head? Thanks for any help.

Post by **ou812** » Wed May 11, 2005 3:17 am

do you want the min. csa or at a particular point? which head, the 195 or 215?
Brian

user-9274568 · Post by **user-9274568** » Wed May 11, 2005 9:15 am

This is the 250cc 18 degree head. And yes the min csa as cast. Thanks.

Chad

Post by **ou812** » Wed May 11, 2005 10:23 pm

Call trick flow and talk to Charlie. He can get you the min csa. I dont have a head here right now and cant seem to find my notes on them. I dont do a whole lot of the 18 stuff, just once in a while.
Brian

user-9274568 · Post by **user-9274568** » Thu May 12, 2005 10:16 am

ou812... Trickflow said 2.19 csa. Sounds small for a 250 cc port.

cboggs · Post by **cboggs** » Thu May 12, 2005 11:07 am

cspeier wrote:ou812... Trickflow said 2.19 csa. Sounds small for a 250 cc port.

Chad,

I would guess that's at the push rod, .. it has a small push rod, ..
then a huge bowl, .. but I don't know the stock CSA's.

Curtis

user-9274568 · Post by **user-9274568** » Thu May 12, 2005 12:53 pm

Curtis

I asked, he said it was at the ST area. Who knows...

cboggs · Post by **cboggs** » Thu May 12, 2005 1:38 pm

Chad,

yea, sounds small for a 250cc port, ..

Curtis