valve seal

bsfc9 · Post by **bsfc9** » Wed Sep 14, 2005 1:38 pm

Any good suggestions for a good valve stem seal that will not get pulled off by a triple spring?

SupStk · Post by **SupStk** » Wed Sep 14, 2005 1:58 pm

just curious, what is the OD of the seal and ID of the spring? What size guide and stem diameter?

bob cook · Post by **bob cook** » Wed Sep 14, 2005 4:34 pm

Give U.S. Seal a try. http://www.valveseal.com/ I have found they manufacture most of the seals that others sell in their own packaging. They normally sell to dealers with tax ID numbers and can suggest a distributor in your area. If you beg a little bit they may sell them direct to you.

bob cook · Post by **bob cook** » Wed Sep 14, 2005 4:40 pm

This link brings you directly to their Excel spread sheet that gives the size and material details. http://www.valveseal.com/doc/performanceseals.xls If you don't see the size you need, you may want to call as I found there are more that were not yet listed.