Oversize 50 mm roller cam bearing?

blackflag · Post by **blackflag** » Thu Apr 17, 2014 2:49 pm

Machine shop bored cam tunnel to 2.286 . Is an oversize bearing available?

MotionMachine · Post by **MotionMachine** » Thu Apr 17, 2014 7:33 pm

Don't know what motor you have but Dart has a 55mm BBC babbitt bearing that takes a 2.300" bore.

blackflag · Post by **blackflag** » Thu Apr 17, 2014 7:45 pm

I would really like to stay 50mm roller bearing if it is possible? Block is motown. They have offered to by new block but would like to save this one.

CNC BLOCKS · Post by **CNC BLOCKS** » Thu Apr 17, 2014 10:16 pm

At one time there was a baring available 2.300 housing bore check with CV Products.

blackflag · Post by **blackflag** » Thu Apr 17, 2014 11:33 pm

Thanks Carl. Do you happen to have a part number they are not on CV website?

CNC BLOCKS · Post by **CNC BLOCKS** » Fri Apr 18, 2014 12:51 am

blackflag wrote:Thanks Carl. Do you happen to have a part number they are not on CV website?

It was years ago but you might check a local bearing ware house.

Don Terrill’s Speed-Talk

Oversize 50 mm roller cam bearing?

Oversize 50 mm roller cam bearing?

Re: Oversize 50 mm roller cam bearing?

Re: Oversize 50 mm roller cam bearing?

Re: Oversize 50 mm roller cam bearing?

Re: Oversize 50 mm roller cam bearing?

Re: Oversize 50 mm roller cam bearing?