Jay Roeder wrote:Just ordered another custom roller for a customer BBF Truck Pull engine. Talked to Eric on Tuesday morning. Cam was ground and shipped SAME DAY! Got it today and it had a Cam Pro sheet included! Very nice! Keep up the good work!
Thanks for the positive feedback. We're trying to have the fastest turn around time with the highest quality product possible.
Thanks
Russ
Hope everybody had a great weekend racing. Just letting you know we're still checking the forum. If anyone has any problems or complaints with anything, let me know.
Thanks
Russ
Xnke wrote:Do you have the tooling to do Datsun OHC cams? They would be regrinds, as the available cores currently in the US are not metallurgically sound and fail very often, even with mild lobes on them.
There is a place in japan that has the original alloy blanks available, though...how much they cost I can't work out yet...or how many I need to buy!
Without getting to see one I don't know, but I would like to take a look at one and see if we do have tooling that will fit it, or that we can modify to make work for this. We'd be glad to regrind any of these you'd like to work on.
Thanks
Russ
I am down in Bowling green and will be bringing the Z up to Louisville for dyno testing later in the year. I can bring a few cam cores with me for you all to look at.
I am down in Bowling green and will be bringing the Z up to Louisville for dyno testing later in the year. I can bring a few cam cores with me for you all to look at.
Excellent, please bring them by and I'll gladly give you a tour of the shop.
Thanks
Russ
Just checking in with you guys. Been a while since we've talked to anybody on here. If anybody needs anything, just let us know. Be glad to help.
Thanks
Russ
hey russ got a cam fro eric last week,,it was a small472 lift 240 235 cut on a 106plus4 is what the paper said,,when i gereeed it in i cam in at 106..need to get eric to prinyt new sheets for this cam,,by the way cam done great i degreed it in a added 4 plus ..little can made great h/p and torque off the corner..enould that we won with it..tthanks again man
Currently, our website is down. It should be up and kicking in a couple of days. Thanks for asking. If there's anything I can do for you, please let me know. By the way, thanks SLPRacingEngines, if there's ever anything else we can do for you or you ever have any quality issues, please let me know.
Thanks
Russ
If anybody's in town for the Street Rod Nationals, I'd like to invite you to stop by the shop anytime from 8:00 AM to 3:00 PM. I'd be glad to show you around Erson Cams, introduce you to the guys who grind your cams, and you can check out how a Berco grinder works in person. 8000 Old 3rd Street Rd, Louisville, KY 40214.
ErsonCamShop wrote:If anybody's in town for the Street Rod Nationals, I'd like to invite you to stop by the shop anytime from 8:00 AM to 3:00 PM. I'd be glad to show you around Erson Cams, introduce you to the guys who grind your cams, and you can check out how a Berco grinder works in person. 8000 Old 3rd Street Rd, Louisville, KY 40214.
I may have to make a special trip sometime just to see the place. Maybe on the way to bike week...
The 392 Hemi cam came today. Spectacular! Who else provides a Cam Pro Plus report with virtually every cam?