Sb2.2 crankshaft
Moderator: Team
-
ClassicComp
- Expert
- Posts: 933
- Joined: Mon Jan 23, 2006 10:50 pm
- Location:
Sb2.2 crankshaft
Need a crank for a bow tie block with 283 mains. 3.625 stroke or longer. Option1 for me would be grinding a 350 main journal crank down. Anyone see any problem with this? Does it have to be rehardened?
results speak for themselves
Re: Sb2.2 crankshaft
I'm quite sure I have a 3.750 stroke billet Winberg sitting around if you need it.
If you end up grinding a 350 main crank down, I'd invest in REM finishing in addition to any hardening.
If you end up grinding a 350 main crank down, I'd invest in REM finishing in addition to any hardening.
-
ClassicComp
- Expert
- Posts: 933
- Joined: Mon Jan 23, 2006 10:50 pm
- Location:
-
ClassicComp
- Expert
- Posts: 933
- Joined: Mon Jan 23, 2006 10:50 pm
- Location: