SBC into 96 mustang

73c34me · Post by **73c34me** » Thu Nov 20, 2014 3:27 pm

Greetings,

Anyone have advise on installing an SBC 355 & Muncie into the mustang? I have a fresh mild build motor & Trans and have access to a 96 rolling chassis mustang. Budget deal, trying to provide my mechanical engineering graduate student son with some hands on experience. I know that a ford motor is obvious, but I don't have one. Thank you in Advance.

69-CHVL · Post by **69-CHVL** » Thu Nov 20, 2014 4:54 pm

I would just drop it in and weld some mounts to the stock k-member, modify the crossmember as needed. I will go in and work, but be prepared for some minor fab. Exhaust could be interesting, as far as headers etc but it can be done. I have a 5.3 in a 96 Stang and it wasnt that hard. It was actually harder b/c of all the turbo stuff under the hood.

rfoll · Post by **rfoll** » Thu Nov 20, 2014 6:32 pm

You might want to figure out the exhaust thing before you weld up any mounts.

wyrmrider · Post by **wyrmrider** » Thu Nov 20, 2014 8:36 pm

It's a Communist plot to overthrow America

nhrastocker · Post by **nhrastocker** » Thu Nov 20, 2014 9:49 pm

Just go to RaceCraft and buy all the required parts to bolt-on including headers.

http://www.racecraft.com

Krooser · Post by **Krooser** » Tue Nov 25, 2014 10:51 pm

My favorite Camaro…

Don Terrill’s Speed-Talk

SBC into 96 mustang

SBC into 96 mustang

Re: SBC into 96 mustang

Re: SBC into 96 mustang

Re: SBC into 96 mustang

Re: SBC into 96 mustang

Re: SBC into 96 mustang