Page 16 of 16
Re: Looking for a few tips on porting 351c 4v heads
Posted: Sat Oct 09, 2021 10:47 pm
by bob460
Danoh1 wrote: ↑Sat Oct 09, 2021 10:53 am
Wow. Just finished reading all 19 pages. Lots of info.
I hope the OP found success with his build. Stone stock Cleveland heads actually work pretty well.
I run stone stock, unported, un-touched 1970 351C 4V CC heads on a 12:1 “old school” Boss 302. 4 inch bore. 3 inch stroke. Holman Moody dual plane high rise intake. Solid flat tappet cam, just under .600 lift. BG prepped Holley 750. Made 430 HP on engine dyno . Ran for almost 18 years with a few freshen ups along the way. Vintage Trans Am racecar. I use the MPG intake plates.
The engine is finally getting new .020 pistons and all new everything else. Heads still un ported. New valve guides going in. Changing the cam up just a little. Expect 450 or so this time around. But probably won’t be able to dyno it.
These are the new 4v heads that come out recently.......look nice
https://scontent.fmel4-1.fna.fbcdn.net/ ... e=6188E6A0
Re: Looking for a few tips on porting 351c 4v heads
Posted: Sun Oct 10, 2021 11:55 pm
by bob460
Kazoom wrote: ↑Sun Oct 10, 2021 10:25 pm
you like them?, i like them too!
looked at those ProMaxx China Cast heads just before i bought more 4V port Avenger heads, a nice 4V port head option for sure.
https://www.corral.net/threads/351c-pro ... s.2508369/
the AFD heads were cast in China also but AFD went under so ProMaxx took over them now, looks like a nice 4V port product.
AFD didn't go under he sold it.....
Re: Looking for a few tips on porting 351c 4v heads
Posted: Mon Oct 11, 2021 12:05 am
by cjperformance
bob460 wrote: ↑Sun Oct 10, 2021 11:55 pm
Kazoom wrote: ↑Sun Oct 10, 2021 10:25 pm
you like them?, i like them too!
looked at those ProMaxx China Cast heads just before i bought more 4V port Avenger heads, a nice 4V port head option for sure.
https://www.corral.net/threads/351c-pro ... s.2508369/
the AFD heads were cast in China also but AFD went under so ProMaxx took over them now, looks like a nice 4V port product.
AFD didn't go under he sold it.....
Yep, some people just love to talk sh!t though.
Re: Looking for a few tips on porting 351c 4v heads
Posted: Mon Oct 11, 2021 12:24 am
by cjperformance
Re: Looking for a few tips on porting 351c 4v heads
Posted: Mon Oct 11, 2021 1:34 am
by bob460
Kazoom wrote: ↑Mon Oct 11, 2021 12:26 am
gotta love those great China Castings EH!
btw, i just heard the China Cast Aussie 351 Arrow block has made 1000 HP
Again
..........it made 1007hp....LMAO
You can't even crack 750hp
...................time for you to buy some real AUSSIE made heads if you want to be a man and not a Canadian little bitch!
Re: Looking for a few tips on porting 351c 4v heads
Posted: Mon Nov 08, 2021 6:14 pm
by bob460
Re: Looking for a few tips on porting 351c 4v heads
Posted: Thu Nov 11, 2021 9:11 am
by Steve.k
The heads at Dragboss garage are mine(1 set) they were built by roush. He’s going to dyno with all.