440, Cam sizing
Moderator: Team
440, Cam sizing
Ok, if I have done this correctly, you will be able to see my Camshaft specs. one with the engine at 13 to 1, and one with the engine as it is now 7-06. I have not run the engine with the new Camshaft, and with the engine's mechanical C-R set at 14 to one. We did run the engine on Dyno-Day 1 with the smaller Cam-shaft, and with the engine's mechanical C-R set at 13 to 1. That is when the engine made 532 H-P. Guys, on Dyno-Day one do not renenber the size of the Headers,. But, I do seem to recall that the headers tubes were on the large size,. Also I think the collectors were too large. The Headwers were a set of borrowed headers, that as of now I have no idea of how to find out theeir sizing, length, collector size etc.
Well Guys chew on this will you? Then tell me what you think.
Good By Predator
You do not have the required permissions to view the files attached to this post.