Another "How much will it make?" Project "Special Needs"

General engine tech -- Drag Racing to Circle Track

Moderator: Team

Olds455
Member
Member
Posts: 94
Joined: Thu Mar 29, 2018 8:18 pm
Location:

Re: Another "How much will it make?" Project "Special Needs"

Post by Olds455 »

=D>

You people are more petty than 13 yr old girls that just got their feelingZ hurt.
steve cowan
Guru
Guru
Posts: 2253
Joined: Wed Jul 27, 2011 5:22 am
Location: brisbane AUSTRALIA

Re: Another "How much will it make?" Project "Special Needs"

Post by steve cowan »

C H A D
good luck on the dyno this weekend,i think 585- 590 hp would be expected and i hope it goes to 600,this is a an extremely strong engine and at 10.5 :1 comp on pump gas with a HR cam is nothing short of amazing,big credit to all involved.
this is one of my favorite threads and i have read all 42 pages 3 times over,it has all the right ingredients-
FUN
FACTS
FICTION
i understand you will be busy on the dyno but some video footage would be greatly appreciated,looking forward to the post dyno dissection :D
steve c
"Pretty don't make power"
CGT
Guru
Guru
Posts: 2063
Joined: Sun May 10, 2009 12:29 pm
Location:

Re: Another "How much will it make?" Project "Special Needs"

Post by CGT »

Well hopefully the dissection involves comparing numbers and not broken stuff. Im ready to be done with this engine and move on to something different...
And so is my '65'
Resized_20160605_165857001.jpg
Resized_20160605_170203001.jpg
Resized_20160605_170153001.jpg
Resized_20160605_165905001.jpg
You do not have the required permissions to view the files attached to this post.
steve cowan
Guru
Guru
Posts: 2253
Joined: Wed Jul 27, 2011 5:22 am
Location: brisbane AUSTRALIA

Re: Another "How much will it make?" Project "Special Needs"

Post by steve cowan »

CGT wrote: Thu Nov 29, 2018 10:25 am Well hopefully the dissection involves comparing numbers and not broken stuff. Im ready to be done with this engine and move on to something different...
And so is my '65'
Resized_20160605_165857001.jpg
Resized_20160605_170203001.jpg
Resized_20160605_170153001.jpg
Resized_20160605_165905001.jpg
damn she is a sweet ride
steve c
"Pretty don't make power"
novadude
Guru
Guru
Posts: 1500
Joined: Thu Oct 11, 2007 3:24 pm
Location: Shippensburg, PA

Re: Another "How much will it make?" Project "Special Needs"

Post by novadude »

That's a good looking chassis!
zums
Guru
Guru
Posts: 1355
Joined: Sat Dec 08, 2007 10:57 am
Location: south jersey

Re: Another "How much will it make?" Project "Special Needs"

Post by zums »

Nice!
Tom
CGT
Guru
Guru
Posts: 2063
Joined: Sun May 10, 2009 12:29 pm
Location:

Re: Another "How much will it make?" Project "Special Needs"

Post by CGT »

zums wrote: Thu Nov 29, 2018 6:40 pm Nice!
Tom
Thanks. Whats your 65 run?
zums
Guru
Guru
Posts: 1355
Joined: Sat Dec 08, 2007 10:57 am
Location: south jersey

Re: Another "How much will it make?" Project "Special Needs"

Post by zums »

CGT wrote: Thu Nov 29, 2018 8:44 pm
zums wrote: Thu Nov 29, 2018 6:40 pm Nice!
Tom
Thanks. Whats your 65 run?
11.1 through full exhaust, 92 pump gas small vales, track has a 11 second roll cage rule, through me out after second run, id be a fool if i couldnt tune a few tenths with open exhaust, so i tagged it, nice stress relief machine, lol
Tom
CGT
Guru
Guru
Posts: 2063
Joined: Sun May 10, 2009 12:29 pm
Location:

Re: Another "How much will it make?" Project "Special Needs"

Post by CGT »

Stock suspenion? Auto?
zums
Guru
Guru
Posts: 1355
Joined: Sat Dec 08, 2007 10:57 am
Location: south jersey

Re: Another "How much will it make?" Project "Special Needs"

Post by zums »

CGT wrote: Thu Nov 29, 2018 10:53 pm Stock suspenion? Auto?
Not completely, stock 6 cylinder springs in rear, South Side machine lower control arms so i can adjust pinion angle, i welded the top arms, and moroso springs in front, 350 turbo trans
Tom
CGT
Guru
Guru
Posts: 2063
Joined: Sun May 10, 2009 12:29 pm
Location:

Re: Another "How much will it make?" Project "Special Needs"

Post by CGT »

Resized_20181130_152706.jpg
Resized_20181130_152716.jpg
You do not have the required permissions to view the files attached to this post.
Carnut1
Guru
Guru
Posts: 4659
Joined: Tue Jun 11, 2013 6:32 pm
Location: Melbourne fl.

Re: Another "How much will it make?" Project "Special Needs"

Post by Carnut1 »

Looks great! Please take a video, we want to hear it! Thanks, Charlie
Servedio Cylinder Head Development
631-816-4911
9:00am - 9:00pm EST
steve cowan
Guru
Guru
Posts: 2253
Joined: Wed Jul 27, 2011 5:22 am
Location: brisbane AUSTRALIA

Re: Another "How much will it make?" Project "Special Needs"

Post by steve cowan »

CGT wrote: Fri Nov 30, 2018 6:41 pm Resized_20181130_152706.jpgResized_20181130_152716.jpg
Hi C H A D,
How did SN go on the dyno? :D
steve c
"Pretty don't make power"
CGT
Guru
Guru
Posts: 2063
Joined: Sun May 10, 2009 12:29 pm
Location:

Re: Another "How much will it make?" Project "Special Needs"

Post by CGT »

It went well Steve. Well kinda. I have all the data in excel...thanks slo-svt. I've been reviewing it off and on. I'm real happy with the engine. Shoot me a PM with your email and I'll send some stuff your way. I can't figure out how post it on the forum.
frankthetank
New Member
New Member
Posts: 24
Joined: Thu Jul 08, 2010 10:23 pm
Location:

Re: Another "How much will it make?" Project "Special Needs"

Post by frankthetank »

Any updates on the results on this? Just curious, thanks for sharing.
Post Reply