Severe duty valves?
Moderator: Team
Severe duty valves?
Has anyone used Competition Products severe duty valves? I'm looking at them for a street strip setup, SB Chevy around 600 HP or so. I've used Herbert's several times in the past with no problems just looking for another affordable option, Thanks
Re: Severe duty valves?
There is some issue with affordable and 600 hp. Buy quality valves! Save up! You will be happier! I am not saying anything negative about the valves you are asking about. I learned a long time ago that quality costs! The only way I would do it.
Servedio Cylinder Head Development
631-816-4911
9:00am - 9:00pm EST
631-816-4911
9:00am - 9:00pm EST
Re: Severe duty valves?
What's the application?
what's critical exhaust like for turbo, boat, truck
what heads stock or special length?
ls valves?
what seats- stock induction hardened or high nickel/ sintered like the good dura bond??
what's critical exhaust like for turbo, boat, truck
what heads stock or special length?
ls valves?
what seats- stock induction hardened or high nickel/ sintered like the good dura bond??
Re: Severe duty valves?
400 SB Chevy SHP block solid roller 12.25 comp. tunnel ram 750 Holley HP's RHS 235cc heads valves need to be +.200 for spring height. Sending heads out to be done but want to supply valves and keepers.wyrmrider wrote:What's the application?
what's critical exhaust like for turbo, boat, truck
what heads stock or special length?
ls valves?
what seats- stock induction hardened or high nickel/ sintered like the good dura bond??
Re: Severe duty valves?
I was looking at Ferrera 6000 series but only see intake +.200 and exhaust only +.150 ??
Re: Severe duty valves?
There's always lash caps...
Felix, qui potuit rerum cognscere causas.
Happy is he who can discover the cause of things.
Happy is he who can discover the cause of things.
-
- Guru
- Posts: 5566
- Joined: Sun Feb 19, 2006 10:19 am
- Location: MA
Re: Severe duty valves?
use +.050" locks on the exhaust valves to get your spring height or call Brian at Dakota parts warehouse for custom length Ferrea valves (at a reasonable cost)
http://www.dpwferreavalves.com
http://www.dpwferreavalves.com
Automotive Machining, cylinder head rebuilding, engine building. Can't seem to quit