432" SBF build.

General engine tech -- Drag Racing to Circle Track

Moderator: Team

Steve.k
Pro
Pro
Posts: 333
Joined: Sat May 28, 2016 10:41 am

Re: 432" SBF build.

Post by Steve.k » Thu Nov 09, 2017 9:58 am

Are you using chi heads for 408?

cjperformance
Guru
Guru
Posts: 2483
Joined: Tue Aug 19, 2008 7:20 am
Location: South Australia

Re: 432" SBF build.

Post by cjperformance » Thu Nov 09, 2017 3:21 pm

Steve.k wrote:
Thu Nov 09, 2017 9:58 am
Are you using chi heads for 408?
No the 408 is getting ported iron heads (well should be), its a clevo block based mild build and the owner is happy with a well mannered low stall torquey cruiser, that said he is constantly umming about just doing a basic set of alloy heads down the track. So it may end up with some trick flows at some stage.
Craig.

Post Reply