8.1 inch rod in stock block/stroke 350 and -----
Moderator: Team
Re: 8.1 inch rod in stock block/stroke 350 and -----
Like I said, then maybe from here on out, I'll start a couple of threads with some cliffhangers, advertise that I'm writing a book, then duck out for a few weeks.
Lykins Motorsports
brent@lykinsmotorsports.com
www.lykinsmotorsports.com
www.customfordcams.com
Custom Ford Windsor, Cleveland, and FE Street/Race Engines
brent@lykinsmotorsports.com
www.lykinsmotorsports.com
www.customfordcams.com
Custom Ford Windsor, Cleveland, and FE Street/Race Engines
Re: 8.1 inch rod in stock block/stroke 350 and -----
I will happily await your book maybe it will influences thousands of young people to try their hand at performance automotive as others have!blykins wrote:Like I said, then maybe from here on out, I'll start a couple of threads with some cliffhangers, advertise that I'm writing a book, then duck out for a few weeks.
If it sells you will then have the money to write another that could influence even more, imagine what would happen if you dedicated every waking hour to it for the rest of your life?
Please Note!
THE ABOVE POST IN NO WAY REFLECTS THE VIEWS OF SPEED TALK OR IT'S MEMBERS AND SHOULD BE VIEWED AS ENTERTAINMENT ONLY...Thanks, The Management!
THE ABOVE POST IN NO WAY REFLECTS THE VIEWS OF SPEED TALK OR IT'S MEMBERS AND SHOULD BE VIEWED AS ENTERTAINMENT ONLY...Thanks, The Management!
Re: 8.1 inch rod in stock block/stroke 350 and -----
Why can't I help for free?
I post on 5-6 different forums and run my own 351 Cleveland forum. I help people day and night by taking phone calls, texts, and emails while running my own business that I don't go out of way to advertise on Speed Talk.
As far as I am concerned, speed talk is not anyone's personal advertising venue.
I post on 5-6 different forums and run my own 351 Cleveland forum. I help people day and night by taking phone calls, texts, and emails while running my own business that I don't go out of way to advertise on Speed Talk.
As far as I am concerned, speed talk is not anyone's personal advertising venue.
Lykins Motorsports
brent@lykinsmotorsports.com
www.lykinsmotorsports.com
www.customfordcams.com
Custom Ford Windsor, Cleveland, and FE Street/Race Engines
brent@lykinsmotorsports.com
www.lykinsmotorsports.com
www.customfordcams.com
Custom Ford Windsor, Cleveland, and FE Street/Race Engines
- midnightbluS10
- Expert
- Posts: 933
- Joined: Sun Oct 20, 2013 8:41 am
- Location: Shreveport, LA
Re: 8.1 inch rod in stock block/stroke 350 and -----
He's covered it before. Not hard to understand, imo. There's a reason he does it that way. I can't recall why but there is a valid, logical reason.blykins wrote:You mean you haven't got used to the agenda yet?
1. Throw out a teaser.
2. Leave for 3-4 weeks so that the post will gain all the momentum/advertising/gains it can.
JC -
bigjoe1 wrote:By the way, I had a long talk with Harold(Brookshire) last year at the PRI show. We met at the airport and he told me everything he knew about everything.It was a nice visit. JOE SHERMAN RACING
Re: 8.1 inch rod in stock block/stroke 350 and -----
No one said you can't.blykins wrote:Why can't I help for free?
I post on 5-6 different forums and run my own 351 Cleveland forum. I help people day and night by taking phone calls, texts, and emails while running my own business that I don't go out of way to advertise on Speed Talk.
As far as I am concerned, speed talk is not anyone's personal advertising venue.
Thats good.
Unless it's "your" sig line?
Please Note!
THE ABOVE POST IN NO WAY REFLECTS THE VIEWS OF SPEED TALK OR IT'S MEMBERS AND SHOULD BE VIEWED AS ENTERTAINMENT ONLY...Thanks, The Management!
THE ABOVE POST IN NO WAY REFLECTS THE VIEWS OF SPEED TALK OR IT'S MEMBERS AND SHOULD BE VIEWED AS ENTERTAINMENT ONLY...Thanks, The Management!
- midnightbluS10
- Expert
- Posts: 933
- Joined: Sun Oct 20, 2013 8:41 am
- Location: Shreveport, LA
Re: 8.1 inch rod in stock block/stroke 350 and -----
We get that you don't agree with it. Voicing that every time he comes to post isn't going to do anything but make you look like an asshole. FYI.blykins wrote:Why can't I help for free?
I post on 5-6 different forums and run my own 351 Cleveland forum. I help people day and night by taking phone calls, texts, and emails while running my own business that I don't go out of way to advertise on Speed Talk.
As far as I am concerned, speed talk is not anyone's personal advertising venue.
JC -
bigjoe1 wrote:By the way, I had a long talk with Harold(Brookshire) last year at the PRI show. We met at the airport and he told me everything he knew about everything.It was a nice visit. JOE SHERMAN RACING
Re: 8.1 inch rod in stock block/stroke 350 and -----
Yep, that's why I said I don't go out of my way to advertise.
That same email address and cell phone number is used by the guys who I help for free....
The OP uses the main forum in ST to market his seminars, books, and even to post engine parts or engines for sale. I don't get it.
That same email address and cell phone number is used by the guys who I help for free....
The OP uses the main forum in ST to market his seminars, books, and even to post engine parts or engines for sale. I don't get it.
Last edited by blykins on Mon Sep 25, 2017 5:21 pm, edited 1 time in total.
Lykins Motorsports
brent@lykinsmotorsports.com
www.lykinsmotorsports.com
www.customfordcams.com
Custom Ford Windsor, Cleveland, and FE Street/Race Engines
brent@lykinsmotorsports.com
www.lykinsmotorsports.com
www.customfordcams.com
Custom Ford Windsor, Cleveland, and FE Street/Race Engines
Re: 8.1 inch rod in stock block/stroke 350 and -----
I'm not the only one. Figure out why.midnightbluS10 wrote:We get that you don't agree with it. Voicing that every time he comes to post isn't going to do anything but make you look like an asshole. FYI.blykins wrote:Why can't I help for free?
I post on 5-6 different forums and run my own 351 Cleveland forum. I help people day and night by taking phone calls, texts, and emails while running my own business that I don't go out of way to advertise on Speed Talk.
As far as I am concerned, speed talk is not anyone's personal advertising venue.
FYI.
Lykins Motorsports
brent@lykinsmotorsports.com
www.lykinsmotorsports.com
www.customfordcams.com
Custom Ford Windsor, Cleveland, and FE Street/Race Engines
brent@lykinsmotorsports.com
www.lykinsmotorsports.com
www.customfordcams.com
Custom Ford Windsor, Cleveland, and FE Street/Race Engines
Re: 8.1 inch rod in stock block/stroke 350 and -----
Whats being missed here is that most people come here because they want to here from people that do this for a living, the fact that you advertise with your web address doesn't bother me because I know that your info comes from your profession and not from the seat of your pants. Or at least I can hope it does.blykins wrote:Yep, that's why I said I don't go out of my way to advertise.
That same email address and cell phone number is used by the guys who I help for free....
Please Note!
THE ABOVE POST IN NO WAY REFLECTS THE VIEWS OF SPEED TALK OR IT'S MEMBERS AND SHOULD BE VIEWED AS ENTERTAINMENT ONLY...Thanks, The Management!
THE ABOVE POST IN NO WAY REFLECTS THE VIEWS OF SPEED TALK OR IT'S MEMBERS AND SHOULD BE VIEWED AS ENTERTAINMENT ONLY...Thanks, The Management!
Re: 8.1 inch rod in stock block/stroke 350 and -----
It's not being missed. Your statement, IMO, is the reason for Speed Talk. My sig line helps me establish credibility among the members here, so as you say, whatever advice I give comes from experience.GARY C wrote:Whats being missed here is that most people come here because they want to here from people that do this for a living, the fact that you advertise with your web address doesn't bother me because I know that your info comes from your profession and not from the seat of your pants. Or at least I can hope it does.blykins wrote:Yep, that's why I said I don't go out of my way to advertise.
That same email address and cell phone number is used by the guys who I help for free....
Why else would you string several hundred members along, making them wait for the answers to a post like waiting to see who shot JR? It's because the high level of post viewing offers an exteme amount of exposure.
Lykins Motorsports
brent@lykinsmotorsports.com
www.lykinsmotorsports.com
www.customfordcams.com
Custom Ford Windsor, Cleveland, and FE Street/Race Engines
brent@lykinsmotorsports.com
www.lykinsmotorsports.com
www.customfordcams.com
Custom Ford Windsor, Cleveland, and FE Street/Race Engines
Re: 8.1 inch rod in stock block/stroke 350 and -----
So now that your established shouldn't you stop advertising?blykins wrote:It's not being missed. Your statement, IMO, is the reason for Speed Talk. My sig line helps me establish credibility among the members here, so as you say, whatever advice I give comes from experience.GARY C wrote:Whats being missed here is that most people come here because they want to here from people that do this for a living, the fact that you advertise with your web address doesn't bother me because I know that your info comes from your profession and not from the seat of your pants. Or at least I can hope it does.blykins wrote:Yep, that's why I said I don't go out of my way to advertise.
That same email address and cell phone number is used by the guys who I help for free....
What is being missed is the blatant advertising that's being done. Why else would you string several hundred members along, making them wait for the answers to a post like waiting to see who shot JR? It's because the high level of post viewing offers an exteme amount of exposure.
I don't know about you but I hope anyone here with good info profits from being here because then they will continue to come here and share. I hope it makes Don profitable so he can keep the site going and produce more published data for me to purchase.
Please Note!
THE ABOVE POST IN NO WAY REFLECTS THE VIEWS OF SPEED TALK OR IT'S MEMBERS AND SHOULD BE VIEWED AS ENTERTAINMENT ONLY...Thanks, The Management!
THE ABOVE POST IN NO WAY REFLECTS THE VIEWS OF SPEED TALK OR IT'S MEMBERS AND SHOULD BE VIEWED AS ENTERTAINMENT ONLY...Thanks, The Management!
Re: 8.1 inch rod in stock block/stroke 350 and -----
I do not use speed talk as my own personal advertising billboard.
I do not have anything listed for sale in this main forum.
I do not ask anyone to patronize my business in my signature line.
I do not start out my threads with "I am writing a book".
Listen if you want to talk about this all evening, I will sit down and block out some time for it.
I do not have anything listed for sale in this main forum.
I do not ask anyone to patronize my business in my signature line.
I do not start out my threads with "I am writing a book".
Listen if you want to talk about this all evening, I will sit down and block out some time for it.
Lykins Motorsports
brent@lykinsmotorsports.com
www.lykinsmotorsports.com
www.customfordcams.com
Custom Ford Windsor, Cleveland, and FE Street/Race Engines
brent@lykinsmotorsports.com
www.lykinsmotorsports.com
www.customfordcams.com
Custom Ford Windsor, Cleveland, and FE Street/Race Engines
Re: 8.1 inch rod in stock block/stroke 350 and -----
So you start a discussion and then leave me in a cliff hanger while you go off and do work? Thats ok I will wait for the Box Set on Net Flix.blykins wrote:I do not use speed talk as my own personal advertising billboard.
I do not have anything listed for sale in this main forum.
I do not ask anyone to patronize my business in my signature line.
I do not start out my threads with "I am writing a book".
Listen if you want to talk about this all evening, I will sit down and block out some time for it.
Please Note!
THE ABOVE POST IN NO WAY REFLECTS THE VIEWS OF SPEED TALK OR IT'S MEMBERS AND SHOULD BE VIEWED AS ENTERTAINMENT ONLY...Thanks, The Management!
THE ABOVE POST IN NO WAY REFLECTS THE VIEWS OF SPEED TALK OR IT'S MEMBERS AND SHOULD BE VIEWED AS ENTERTAINMENT ONLY...Thanks, The Management!
Re: 8.1 inch rod in stock block/stroke 350 and -----
dang ladies!!!! we all know how DV operates, if he was a woman he would be considered a D&^% tease if you dont like how he operates, dont read his posts. pretty simple. despite the fact you usually have to read through 50 pages of fluff, you can usually get a tidbit or two of info.
Re: 8.1 inch rod in stock block/stroke 350 and -----
lefty o wrote:dang ladies!!!! we all know how DV operates, if he was a woman he would be considered a D&^% tease if you dont like how he operates, dont read his posts. pretty simple. despite the fact you usually have to read through 50 pages of fluff, you can usually get a tidbit or two of info.
Please Note!
THE ABOVE POST IN NO WAY REFLECTS THE VIEWS OF SPEED TALK OR IT'S MEMBERS AND SHOULD BE VIEWED AS ENTERTAINMENT ONLY...Thanks, The Management!
THE ABOVE POST IN NO WAY REFLECTS THE VIEWS OF SPEED TALK OR IT'S MEMBERS AND SHOULD BE VIEWED AS ENTERTAINMENT ONLY...Thanks, The Management!