***Post Pics of what you are working on**
Moderator: Team
Re: ***Post Pics of what you are working on**
Well I'll be damned. All these years I had been thinking it was 180* headers.
Re: ***Post Pics of what you are working on**
I'm building a wall to separate dirty/clean. I would absolutely hate to be building my shop right now. Must be all the natural disasters we have had. My, how lumber took a hike! First of the year, 2x4 stud was $1.59.. Saturday at the same place $3.89... crazy
-
- New Member
- Posts: 42
- Joined: Wed Jan 20, 2016 5:47 pm
- Location:
Re: ***Post Pics of what you are working on**
brodix 18C heads
15.7 comp
sheetmetal intake
in this car
You do not have the required permissions to view the files attached to this post.
Re: ***Post Pics of what you are working on**
SAme here. Big electric for larger removal, foredom for the rest. Cant see the need for air anymore
Re: ***Post Pics of what you are working on**
Yeah, air blows!...See what I did there!cuisinartvette wrote: ↑Mon Oct 16, 2017 7:46 pmSAme here. Big electric for larger removal, foredom for the rest. Cant see the need for air anymore
Please Note!
THE ABOVE POST IN NO WAY REFLECTS THE VIEWS OF SPEED TALK OR IT'S MEMBERS AND SHOULD BE VIEWED AS ENTERTAINMENT ONLY...Thanks, The Management!
THE ABOVE POST IN NO WAY REFLECTS THE VIEWS OF SPEED TALK OR IT'S MEMBERS AND SHOULD BE VIEWED AS ENTERTAINMENT ONLY...Thanks, The Management!
Re: ***Post Pics of what you are working on**
And my permit was finally approved today , note the stakes and string in the background.cspeier wrote: ↑Mon Oct 16, 2017 3:35 pm I'm building a wall to separate dirty/clean. I would absolutely hate to be building my shop right now. Must be all the natural disasters we have had. My, how lumber took a hike! First of the year, 2x4 stud was $1.59.. Saturday at the same place $3.89... crazy
Bought some lumber this weekend for a pumpkin chuckin manine im building with the kids.....it should throw a 10lb pumpkin 100 yards. There a contest at their karate, after that I think skeet shooting pumpkins would be awsome! But it was $300 for all the stuff.
You do not have the required permissions to view the files attached to this post.
Mark
Mechanical Engineer
Mechanical Engineer
- thedynoguy
- Member
- Posts: 116
- Joined: Mon Jan 21, 2013 11:47 am
- Location: Webster, New York
Re: ***Post Pics of what you are working on**
I just found this thread. Here's a 360 sprint engine on the pump...
You do not have the required permissions to view the files attached to this post.
- Rick Finsta
- Pro
- Posts: 370
- Joined: Sat Sep 13, 2014 10:22 am
- Location:
Re: ***Post Pics of what you are working on**
Roman Ballista MkIV?mk e wrote: ↑Mon Oct 16, 2017 8:37 pmAnd my permit was finally approved today , note the stakes and string in the background.cspeier wrote: ↑Mon Oct 16, 2017 3:35 pm I'm building a wall to separate dirty/clean. I would absolutely hate to be building my shop right now. Must be all the natural disasters we have had. My, how lumber took a hike! First of the year, 2x4 stud was $1.59.. Saturday at the same place $3.89... crazy
Bought some lumber this weekend for a pumpkin chuckin manine im building with the kids.....it should throw a 10lb pumpkin 100 yards. There a contest at their karate, after that I think skeet shooting pumpkins would be awsome! But it was $300 for all the stuff.
Mike Gallo, President
Protohawk - Design/Prototyping, Small Project Support, and Contract Manufacturing
CCA Racing Products - Torque Plates and Engine Rebuild Tooling
Protohawk - Design/Prototyping, Small Project Support, and Contract Manufacturing
CCA Racing Products - Torque Plates and Engine Rebuild Tooling
Re: ***Post Pics of what you are working on**
Those are very cool...but hard to make. We're building a trebuchet. It will use barbell weights as the counter weight, I'm designing for 500lb max. I think 350 or so will get us to 100 yards. It will all fold up for storage and transport and be held together with 4 racket straps so 5 minute setup....in theory amy way
I found an on line simulator that's fun to play with. We using an 8'long arm and sling, 3' short arm and length of weight, 6.5' pivot height.
http://www.virtualtrebuchet.com
I need to get it done this weekend, the garage construction starts next week with moving a buried propane tank on Tuesday, then I'm ready to di g for the foundation
Mark
Mechanical Engineer
Mechanical Engineer
-
- Guru
- Posts: 2694
- Joined: Fri Jan 09, 2009 8:51 pm
- Location: Australia
Re: ***Post Pics of what you are working on**
Another billet EJ25 all machined up & ready to go to customer for assembly, Willal Racing WREJBB block, Manley 2.5 billet crank, Manley Turbo Tuff I beams, Manley slugs, ACL race brgs etc - good for 1000hp:
DSC00769 by tony knight, on Flickr
"Sleeper" cheby, stock 4 bolt vortech block, 388 cubes, ported Pro topline iron heads, ported vic jnr, 262/270 on 107 Crane street roller etc, pump fuel engine, just waiting on cam, dyno in a couple of weeks:
DSC00770 by tony knight, on Flickr
DSC00769 by tony knight, on Flickr
"Sleeper" cheby, stock 4 bolt vortech block, 388 cubes, ported Pro topline iron heads, ported vic jnr, 262/270 on 107 Crane street roller etc, pump fuel engine, just waiting on cam, dyno in a couple of weeks:
DSC00770 by tony knight, on Flickr
-
- Guru
- Posts: 4607
- Joined: Sun Sep 18, 2011 11:31 am
- Location: Heading for a bang up with Andromeda as we all are.
Re: ***Post Pics of what you are working on**
What's sitting behind the Cheby to the right?
You can cut a man's tongue from his mouth, but that does not mean he’s a liar, it just shows that you fear the truth he might speak about you!
-
- Guru
- Posts: 2694
- Joined: Fri Jan 09, 2009 8:51 pm
- Location: Australia
Re: ***Post Pics of what you are working on**
That would be a 1fz-fe toyota 4.5l 6 banger.
Big hitter when its done - 1700+hp.
Big hitter when its done - 1700+hp.
-
- Guru
- Posts: 4607
- Joined: Sun Sep 18, 2011 11:31 am
- Location: Heading for a bang up with Andromeda as we all are.
Re: ***Post Pics of what you are working on**
Wow! Beware of shrapnel no?
You can cut a man's tongue from his mouth, but that does not mean he’s a liar, it just shows that you fear the truth he might speak about you!
Re: ***Post Pics of what you are working on**
Yes and No the USA Canada softwood lumber agreement expired and with Chump tearing up every trade deal he can, it's doubtful it will be settled soon. So lumber imports from Germany are up almost tenfold at 900%, Russia up 42%, Brazil up 64%.cspeier wrote: ↑Mon Oct 16, 2017 3:35 pm I'm building a wall to separate dirty/clean. I would absolutely hate to be building my shop right now. Must be all the natural disasters we have had. My, how lumber took a hike! First of the year, 2x4 stud was $1.59.. Saturday at the same place $3.89... crazy
-
- Guru
- Posts: 2694
- Joined: Fri Jan 09, 2009 8:51 pm
- Location: Australia