Main bearing caps 6.2 SRT8

General engine tech -- Drag Racing to Circle Track

Moderator: Team

Post Reply
corvette90
New Member
New Member
Posts: 28
Joined: Sun Aug 09, 2009 2:26 pm

Main bearing caps 6.2 SRT8

Post by corvette90 » Fri Oct 13, 2017 1:18 pm

hi all

hope you can help me with some questions

friend of mine have his 6.2 Hemi stroked to 426ci, i assume the shop messed up a lot of things, so engine is toast after 1000km..

the main bearing caps got so hot, that the have about .02" clearance in the block!!
can anybody give me the measured width of the caps and the recess in the block?

another thing, oil squirters had been cut of..does anybody have p/n handy or know where to buy them?

regards

Reinhold

pdq67
Guru
Guru
Posts: 6316
Joined: Thu Mar 04, 2010 8:05 pm

Re: Main bearing caps 6.2 SRT8

Post by pdq67 » Fri Oct 13, 2017 3:06 pm

Is this a Packard, Buick or a Pontiac straight-8 engine??

I just had to ask is all.....................

pdq67

corvette90
New Member
New Member
Posts: 28
Joined: Sun Aug 09, 2009 2:26 pm

Re: Main bearing caps 6.2 SRT8

Post by corvette90 » Fri Oct 13, 2017 3:36 pm

sorry, made a mistake, its a 6.1 from a 2008 SRT8 Jeep

regards

Post Reply