NEW Pro-Filer SBC 23º Manifold

General engine tech -- Drag Racing to Circle Track

Moderator: Team

cspeier
Guru
Guru
Posts: 2478
Joined: Thu Mar 31, 2005 5:31 pm
Location: Hays Kansas
Contact:

NEW Pro-Filer SBC 23º Manifold

Post by cspeier » Tue Oct 24, 2017 5:13 pm

I get many PM's on the new Pro-Filer SBC manifold so I thought I would post up a few pictures and rough lengths.

I have a few dyno tests lined out for some data.

Outside runner: 6.00
Inside runner: 5.50
Outside opening: 3.60
Inside opening: 3.30 and 3.10

Image

Image

Image

Carnut1
Guru
Guru
Posts: 3235
Joined: Tue Jun 11, 2013 6:32 pm
Location: Melbourne fl.

Re: NEW Pro-Filer SBC 23º Manifold

Post by Carnut1 » Tue Oct 24, 2017 5:36 pm

Nice looking piece.
Servedio Cylinder Head Development
631-816-4911
9:00am - 9:00pm EST

cgarb
Guru
Guru
Posts: 1387
Joined: Wed Jul 09, 2014 11:50 am
Location: Maryland

Re: NEW Pro-Filer SBC 23º Manifold

Post by cgarb » Tue Oct 24, 2017 6:11 pm

Damn it...why can't I see these pictures....just black boxes with an X.

racear2865
Guru
Guru
Posts: 1358
Joined: Mon Sep 21, 2009 11:58 pm
Location: tenn

Re: NEW Pro-Filer SBC 23º Manifold

Post by racear2865 » Tue Oct 24, 2017 7:29 pm

Will you run trials out of the box as well as prepped.
reed

cgarb
Guru
Guru
Posts: 1387
Joined: Wed Jul 09, 2014 11:50 am
Location: Maryland

Re: NEW Pro-Filer SBC 23º Manifold

Post by cgarb » Tue Oct 24, 2017 7:33 pm

Are they available to the public yet? Profiler has nothing about them on their website yet. I'm looking at buying an intake for next year and was almost set to pull the trigger on a 300-25 and now this happens...

cgarb
Guru
Guru
Posts: 1387
Joined: Wed Jul 09, 2014 11:50 am
Location: Maryland

Re: NEW Pro-Filer SBC 23º Manifold

Post by cgarb » Tue Oct 24, 2017 7:43 pm

I searched for Wilson manifolds and Summit racing has them listed 495 dollars. Expensive, but if they are better out of the box than anything else available, Its cheaper than having something ported. Nothing against you head porters that are porting for a living...why not just start with the best. I will be watching this one for sure.

Prostreetbike
Member
Member
Posts: 84
Joined: Mon Feb 08, 2010 8:10 pm

Re: NEW Pro-Filer SBC 23º Manifold

Post by Prostreetbike » Tue Oct 24, 2017 8:51 pm

Any flow numbers for out of the box ?

User avatar
BOOT
Guru
Guru
Posts: 1338
Joined: Fri Apr 09, 2010 6:23 pm
Location: Michigan

Re: NEW Pro-Filer SBC 23º Manifold

Post by BOOT » Tue Oct 24, 2017 9:55 pm

Are those locating pin holes on the flange? If so not a fan of the location.
I know as much as I can learn and try to keep an open mind to anything!

If I didn't overthink stuff I wouldn't be on speedtalk!

ZEOHSIX
Pro
Pro
Posts: 375
Joined: Sun Aug 19, 2012 2:25 am

Re: NEW Pro-Filer SBC 23º Manifold

Post by ZEOHSIX » Tue Oct 24, 2017 10:19 pm

That intake is really well done in the plenum area....NICE JOB by Chad and the foundry very impressive work!

F-BIRD'88
Guru
Guru
Posts: 5661
Joined: Tue Mar 27, 2007 6:56 pm
Location: Ontario, Canada

Re: NEW Pro-Filer SBC 23º Manifold

Post by F-BIRD'88 » Wed Oct 25, 2017 2:13 am

Thats a wild intake. Interesting stuff.

Frankshaft
Pro
Pro
Posts: 436
Joined: Sun Jul 05, 2015 6:01 pm

Re: NEW Pro-Filer SBC 23º Manifold

Post by Frankshaft » Wed Oct 25, 2017 9:08 am

ZEOHSIX wrote:
Tue Oct 24, 2017 10:19 pm
That intake is really well done in the plenum area....NICE JOB by Chad and the foundry very impressive work!
Could be wrong, but pretty sure Wilson Manifolds were who developed it. Its a nice looking piece though. The thing that always bugged me about profiler manifolds, is, their marketing has always been, performs like a ported manifold without the porting. But they are always 2 to 3 times more expensive. So, your actually paying for the porting for a cast manifold. But they still need porting.

cspeier
Guru
Guru
Posts: 2478
Joined: Thu Mar 31, 2005 5:31 pm
Location: Hays Kansas
Contact:

Re: NEW Pro-Filer SBC 23º Manifold

Post by cspeier » Wed Oct 25, 2017 10:26 am

I had nothing to do with this manifold. However the price point is in line especially if it performs vs plenum moded manifolds.

$424.24 SV2 Jegs
$313.95 300-110 Jegs
$309.87 2925 Jegs

The 2925 is perhaps the worst manifold out of the box ever made. The other two perform well oob.

I have tests lined out, if it doesn't perform I'll tell you.
Last edited by cspeier on Wed Oct 25, 2017 10:28 am, edited 1 time in total.

cspeier
Guru
Guru
Posts: 2478
Joined: Thu Mar 31, 2005 5:31 pm
Location: Hays Kansas
Contact:

Re: NEW Pro-Filer SBC 23º Manifold

Post by cspeier » Wed Oct 25, 2017 10:27 am

Prostreetbike wrote:
Tue Oct 24, 2017 8:51 pm
Any flow numbers for out of the box ?
Never flowed a manifold alone.

cspeier
Guru
Guru
Posts: 2478
Joined: Thu Mar 31, 2005 5:31 pm
Location: Hays Kansas
Contact:

Re: NEW Pro-Filer SBC 23º Manifold

Post by cspeier » Wed Oct 25, 2017 10:27 am

BOOT wrote:
Tue Oct 24, 2017 9:55 pm
Are those locating pin holes on the flange? If so not a fan of the location.
?????

resurrectionjoe
Member
Member
Posts: 137
Joined: Fri Sep 26, 2008 12:00 am
Location: Northeastern PA

Re: NEW Pro-Filer SBC 23º Manifold

Post by resurrectionjoe » Wed Oct 25, 2017 11:34 am

cspeier wrote:
Wed Oct 25, 2017 10:27 am
BOOT wrote:
Tue Oct 24, 2017 9:55 pm
Are those locating pin holes on the flange? If so not a fan of the location.
?????
Chad I believe he's referring to these.
Profiler1.jpg
You do not have the required permissions to view the files attached to this post.

Post Reply