friend just asked me,am I right
Moderator: Team
friend just asked me,am I right
680hp with 3000# should go 140 mph with a 1,30 60 ft should run 9.50. 1.50 should 9.95 140 mph with 5:14/30" and 10% conv slip = 8900 rpm 140 with 4:10/28" and 10% conv slip = 7600. I don't know if my numbers are right. Rpm sound high,??????Oldhead I know conv.(6000rpm) slip should be 15/20%
Quicker then most
-
- Guru
- Posts: 1508
- Joined: Sun Apr 03, 2016 1:17 am
- Location:
Re: friend just asked me,am I right
oldhead wrote: ↑Fri Dec 29, 2017 5:48 pm 680hp with 3000# should go 140 mph with a 1,30 60 ft should run 9.50. 1.50 should 9.95 140 mph with 5:14/30" and 10% conv slip = 8900 rpm 140 with 4:10/28" and 10% conv slip = 7600. I don't know if my numbers are right. Rpm sound high,??????Oldhead I know conv.(6000rpm) slip should be 15/20%
I get 144 MPH and should be 9.30ish to 9.50ish.
-
- Guru
- Posts: 1508
- Joined: Sun Apr 03, 2016 1:17 am
- Location: