hjallle123 wrote: ↑Mon Jan 15, 2018 8:47 pm Hi
I have a 18 degree smallblock with a hogan sheetmetal intake with 2 demon 750 cfm with 850cfm baseplate (just find that out)
the heads are brodix 18C heads weldtech cncported 2.18 1.625 titanium valves jesel 1.6 int 1.55 exh
flow 352 intake 700 lift 245 exh ,700 lift
cam is 114 lobe sep 110 inteke centerline
@0.50 282 in 294 exh dur ( yes the cam is about 10 degees wrong )
765 lift int 735 lift exh
( yes have degree the cam )
i did dyno tested the engine and it was making 768 horsepower on 7500 rpm
messured one carb on dyno it was flowing 495 at wot
so the engine was taking about 990 cfm
i was thinking if i am ported the heads with more flow to about 375-380 cfm on intake 265 cfm exh
changing cam with the new ported heads
can dual 1050 dominator carburators suport this
thinking.. with 0.5 vacuum the 2 dominators will flow about 1212 cfm with the sheetmetal intake
it dosnt mather if it will rev about 8000-8500 rpm
Thanks
can dual 1050 Dominator carburetors support this
Yes. #1 choice. Bob Glidden used a pair of 1050s on his 340.