Competitors For The Race Engine Challenge

General engine tech -- Drag Racing to Circle Track

Moderator: Team

Post Reply
Gregory
Member
Member
Posts: 197
Joined: Mon Nov 04, 2013 11:01 am
Location: Charlotte
Contact:

Competitors For The Race Engine Challenge

Post by Gregory »

The following is the list of the competitors for the www.RaceEngineChallenge.com :

- RM Competition Randy Malik SBF/SVO
- Lendall Caverly Pontiac
- Griffin Motorsports Joe Griffin SBC/15*
- Griffin Motorsports Joe Griffin BBC
- Hammerhead Performance Engines Greg Brown SBF/Hemi
- Hinkle Performance Engines Buck Hinkle SB2
- Raceheads & Dyno Geeks Carlos Aghbashian Stephen Momette GenIII Hemi
- Semco Performance Michael Semchee Pontiac/Kauffman
- Corey Short SBM/W2
- TPIS Clay Witt LS3
- Vaseleniuck Engine Development Dave Vaseleniuck SB2
- Vaseleniuck Engine Development Derick Vaseleniuck Lawrence Shaw Olds/Ultra Pro
- Valley Performance Jack Barna John Lehone SBM/Edelbrock
- Terry Walters Precision Engines Terry Walters David Vizard SBF/D3
- WCH Racing Engines Jammie Wells LS/SBC Hybrid/Brodix
- WCH Racing Engines Jammie Wells SBC/Brodix Head Hunter

Mark McKeown, Titus Performance had a bad fire in his shop and had to drop out. We let Mark know
that if he can get things back together we would always make room for him.
Greg Finnicna
Charlotte, NC
-
-
_
Walter R. Malik
Guru
Guru
Posts: 6340
Joined: Tue Jul 24, 2012 11:15 am
Location: Roseville, Michigan (just north of Detroit)
Contact:

Re: Competitors For The Race Engine Challenge

Post by Walter R. Malik »

Gregory wrote: Mon Mar 19, 2018 2:15 pm The following is the list of the competitors for the www.RaceEngineChallenge.com :

- RM Competition Randy Malik SBF/SVO
- Lendall Caverly Pontiac
- Griffin Motorsports Joe Griffin SBC/15*
- Griffin Motorsports Joe Griffin BBC
- Hammerhead Performance Engines Greg Brown SBF/Hemi
- Hinkle Performance Engines Buck Hinkle SB2
- Raceheads & Dyno Geeks Carlos Aghbashian Stephen Momette GenIII Hemi
- Semco Performance Michael Semchee Pontiac/Kauffman
- Corey Short SBM/W2
- TPIS Clay Witt LS3
- Vaseleniuck Engine Development Dave Vaseleniuck SB2
- Vaseleniuck Engine Development Derick Vaseleniuck Lawrence Shaw Olds/Ultra Pro
- Valley Performance Jack Barna John Lehone SBM/Edelbrock
- Terry Walters Precision Engines Terry Walters David Vizard SBF/D3
- WCH Racing Engines Jammie Wells LS/SBC Hybrid/Brodix
- WCH Racing Engines Jammie Wells SBC/Brodix Head Hunter

Mark McKeown, Titus Performance had a bad fire in his shop and had to drop out. We let Mark know
that if he can get things back together we would always make room for him.
Greg Finnicna
Charlotte, NC
-
-
_
That's more than 15 ...? :-k
http://www.rmcompetition.com
Specialty engine building at its finest.
User avatar
CamKing
Guru
Guru
Posts: 10709
Joined: Wed Aug 08, 2007 4:05 pm
Location: Denver, NC
Contact:

Re: Competitors For The Race Engine Challenge

Post by CamKing »

I'm interested in see what the CID is going to be for the SB2 and D3 headed engines.
With the engine needed to be efficient from 4,000-4,500, those heads are going to need at least 420" below them.
Mike Jones
Jones Cam Designs

Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
A_VAS
Pro
Pro
Posts: 208
Joined: Thu Dec 03, 2009 1:52 pm
Location: Harrisburg, PA

Re: Competitors For The Race Engine Challenge

Post by A_VAS »

is the contest open to spectate ?

I can arrange a work trip that week...would like to check it out.
too lazy to make power w/o boost
Tom Walker
Pro
Pro
Posts: 293
Joined: Tue Aug 22, 2017 5:58 pm
Location: Louisville,KY

Re: Competitors For The Race Engine Challenge

Post by Tom Walker »

I am also wanting to come and spectate if that is possible. Would be willing to show up early for the week and help with any prep that I could help with to get things ready.
Walter R. Malik
Guru
Guru
Posts: 6340
Joined: Tue Jul 24, 2012 11:15 am
Location: Roseville, Michigan (just north of Detroit)
Contact:

Re: Competitors For The Race Engine Challenge

Post by Walter R. Malik »

CamKing wrote: Tue Mar 20, 2018 2:19 pm I'm interested in see what the CID is going to be for the SB2 and D3 headed engines.
With the engine needed to be efficient from 4,000-4,500, those heads are going to need at least 420" below them.
I heard from somewhere that the D3 headed engine was 427 cubic inches.

I am using C3 heads and the engine will be 382 cubic inches.
http://www.rmcompetition.com
Specialty engine building at its finest.
User avatar
CamKing
Guru
Guru
Posts: 10709
Joined: Wed Aug 08, 2007 4:05 pm
Location: Denver, NC
Contact:

Re: Competitors For The Race Engine Challenge

Post by CamKing »

Walter R. Malik wrote: Sun Mar 25, 2018 3:20 pm I heard from somewhere that the D3 headed engine was 427 cubic inches.
That makes sense.
The D3 is a big port.
Mike Jones
Jones Cam Designs

Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
Walter R. Malik
Guru
Guru
Posts: 6340
Joined: Tue Jul 24, 2012 11:15 am
Location: Roseville, Michigan (just north of Detroit)
Contact:

Re: Competitors For The Race Engine Challenge

Post by Walter R. Malik »

Greg ... you have a PM.
http://www.rmcompetition.com
Specialty engine building at its finest.
Post Reply