The following is the list of the competitors for the www.RaceEngineChallenge.com :
- RM Competition Randy Malik SBF/SVO
- Lendall Caverly Pontiac
- Griffin Motorsports Joe Griffin SBC/15*
- Griffin Motorsports Joe Griffin BBC
- Hammerhead Performance Engines Greg Brown SBF/Hemi
- Hinkle Performance Engines Buck Hinkle SB2
- Raceheads & Dyno Geeks Carlos Aghbashian Stephen Momette GenIII Hemi
- Semco Performance Michael Semchee Pontiac/Kauffman
- Corey Short SBM/W2
- TPIS Clay Witt LS3
- Vaseleniuck Engine Development Dave Vaseleniuck SB2
- Vaseleniuck Engine Development Derick Vaseleniuck Lawrence Shaw Olds/Ultra Pro
- Valley Performance Jack Barna John Lehone SBM/Edelbrock
- Terry Walters Precision Engines Terry Walters David Vizard SBF/D3
- WCH Racing Engines Jammie Wells LS/SBC Hybrid/Brodix
- WCH Racing Engines Jammie Wells SBC/Brodix Head Hunter
Mark McKeown, Titus Performance had a bad fire in his shop and had to drop out. We let Mark know
that if he can get things back together we would always make room for him.
Greg Finnicna
Charlotte, NC
-
-
_
Competitors For The Race Engine Challenge
Moderator: Team
-
- Guru
- Posts: 6378
- Joined: Tue Jul 24, 2012 11:15 am
- Location: Roseville, Michigan (just north of Detroit)
- Contact:
Re: Competitors For The Race Engine Challenge
That's more than 15 ...?Gregory wrote: ↑Mon Mar 19, 2018 2:15 pm The following is the list of the competitors for the www.RaceEngineChallenge.com :
- RM Competition Randy Malik SBF/SVO
- Lendall Caverly Pontiac
- Griffin Motorsports Joe Griffin SBC/15*
- Griffin Motorsports Joe Griffin BBC
- Hammerhead Performance Engines Greg Brown SBF/Hemi
- Hinkle Performance Engines Buck Hinkle SB2
- Raceheads & Dyno Geeks Carlos Aghbashian Stephen Momette GenIII Hemi
- Semco Performance Michael Semchee Pontiac/Kauffman
- Corey Short SBM/W2
- TPIS Clay Witt LS3
- Vaseleniuck Engine Development Dave Vaseleniuck SB2
- Vaseleniuck Engine Development Derick Vaseleniuck Lawrence Shaw Olds/Ultra Pro
- Valley Performance Jack Barna John Lehone SBM/Edelbrock
- Terry Walters Precision Engines Terry Walters David Vizard SBF/D3
- WCH Racing Engines Jammie Wells LS/SBC Hybrid/Brodix
- WCH Racing Engines Jammie Wells SBC/Brodix Head Hunter
Mark McKeown, Titus Performance had a bad fire in his shop and had to drop out. We let Mark know
that if he can get things back together we would always make room for him.
Greg Finnicna
Charlotte, NC
-
-
_
http://www.rmcompetition.com
Specialty engine building at its finest.
Specialty engine building at its finest.
Re: Competitors For The Race Engine Challenge
I'm interested in see what the CID is going to be for the SB2 and D3 headed engines.
With the engine needed to be efficient from 4,000-4,500, those heads are going to need at least 420" below them.
With the engine needed to be efficient from 4,000-4,500, those heads are going to need at least 420" below them.
Mike Jones
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
Re: Competitors For The Race Engine Challenge
is the contest open to spectate ?
I can arrange a work trip that week...would like to check it out.
I can arrange a work trip that week...would like to check it out.
too lazy to make power w/o boost
-
- Pro
- Posts: 297
- Joined: Tue Aug 22, 2017 5:58 pm
- Location: Louisville,KY
Re: Competitors For The Race Engine Challenge
I am also wanting to come and spectate if that is possible. Would be willing to show up early for the week and help with any prep that I could help with to get things ready.
-
- Guru
- Posts: 6378
- Joined: Tue Jul 24, 2012 11:15 am
- Location: Roseville, Michigan (just north of Detroit)
- Contact:
Re: Competitors For The Race Engine Challenge
I heard from somewhere that the D3 headed engine was 427 cubic inches.
I am using C3 heads and the engine will be 382 cubic inches.
http://www.rmcompetition.com
Specialty engine building at its finest.
Specialty engine building at its finest.
Re: Competitors For The Race Engine Challenge
That makes sense.Walter R. Malik wrote: ↑Sun Mar 25, 2018 3:20 pm I heard from somewhere that the D3 headed engine was 427 cubic inches.
The D3 is a big port.
Mike Jones
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
-
- Guru
- Posts: 6378
- Joined: Tue Jul 24, 2012 11:15 am
- Location: Roseville, Michigan (just north of Detroit)
- Contact:
Re: Competitors For The Race Engine Challenge
Greg ... you have a PM.
http://www.rmcompetition.com
Specialty engine building at its finest.
Specialty engine building at its finest.