BG regulator port for fuel pressure guage

General engine tech -- Drag Racing to Circle Track

Moderator: Team

Post Reply
redliner
Expert
Expert
Posts: 777
Joined: Sun Feb 26, 2012 4:07 pm
Location:

BG regulator port for fuel pressure guage

Post by redliner »

I have an old Barry Grant fuel regulator but do not know the part number. It has a small port in the side of the regulator blocked off with a allen plug which is the correct size for my fuel pressure line. My question is would I get an accurate reading on my fuel pressure if I plug in there. I do not know what else it would be for. My guess is either pressure guage access or bleeding system? I think it should work. The regulator is plumbed at the rear of the fuel log on my carby
steve cowan
Guru
Guru
Posts: 2253
Joined: Wed Jul 27, 2011 5:22 am
Location: brisbane AUSTRALIA

Re: BG regulator port for fuel pressure guage

Post by steve cowan »

Redline,
Yep fuel pressure gauge port
1/8" NPT I think
steve c
"Pretty don't make power"
redliner
Expert
Expert
Posts: 777
Joined: Sun Feb 26, 2012 4:07 pm
Location:

Re: BG regulator port for fuel pressure guage

Post by redliner »

steve cowan wrote: Wed May 16, 2018 10:18 pm Redline,
Yep fuel pressure gauge port
1/8" NPT I think
Thanks Steve, just making sure before I make braided lines.
Post Reply