cast iron ex. manifolds and alu heads.

General engine tech -- Drag Racing to Circle Track

Moderator: Team

PackardV8
Guru
Guru
Posts: 7619
Joined: Sun Jul 30, 2006 2:03 pm
Location: Spokane, WA

Re: cast iron ex. manifolds and alu heads.

Post by PackardV8 »

GerryP wrote: Tue May 22, 2018 4:52 pm I don't use anything between the iron exhaust manifold and the aluminum head. If the flanges are flat and clean, I just bolt on the manifold. So, given that, what doom am I inviting upon myself?
My machinist would buy you a beer. (He only drinks light beer, but that's another story.)
Jack Vines
Studebaker-Packard V8 Limited
Obsolete Engineering
The Radius Kid
Expert
Expert
Posts: 670
Joined: Mon May 28, 2012 6:46 pm
Location:

Re: cast iron ex. manifolds and alu heads.

Post by The Radius Kid »

Calypso wrote: Mon May 21, 2018 1:29 pm Gasket or thin bead of hi temp silicone?
Have a look at these: http://catalog.remflex.com/
The Nazis didn't lose WWII,they just changed uniforms.Now they run the place.
Post Reply