Anyone use Trend brand lifters?

General engine tech -- Drag Racing to Circle Track

Moderator: Team

Post Reply
427dart
Expert
Expert
Posts: 910
Joined: Thu Apr 02, 2015 3:23 pm
Location:

Anyone use Trend brand lifters?

Post by 427dart »

Any info on their products and do they make the tool steel lifters?
Top
Walter R. Malik
Guru
Guru
Posts: 6381
Joined: Tue Jul 24, 2012 11:15 am
Location: Roseville, Michigan (just north of Detroit)
Contact:
Contact Walter R. Malik

Re: Anyone use Trend brand lifters?

Post by Walter R. Malik »

427dart wrote: ↑Thu Aug 23, 2018 10:43 pm Any info on their products and do they make the tool steel lifters?
YES ... they work well except be aware that they have direct oiling to the pushrod, (at least the 6 sets I have used, do).
The lifter galleries need to be oiling restricted.
http://www.rmcompetition.com
Specialty engine building at its finest.
Top
tenxal
Expert
Expert
Posts: 804
Joined: Sun Nov 17, 2013 8:48 pm
Location:

Re: Anyone use Trend brand lifters?

Post by tenxal »

I use them as do many of my fellow racers. They offer a pushrod cup with a .014 oil hole to help with oil restriction. These can be spec'd for new lifters and are also available seperately should you need them.
Top
blykins
Guru
Guru
Posts: 2128
Joined: Mon Aug 27, 2007 9:59 pm
Location: Louisville, KY

Re: Anyone use Trend brand lifters?

Post by blykins »

I use them. Love them.
Lykins Motorsports
brent@lykinsmotorsports.com
www.lykinsmotorsports.com
www.customfordcams.com
Custom Ford Windsor, Cleveland, and FE Street/Race Engines
Top
BlitzA64
Expert
Expert
Posts: 731
Joined: Sun Feb 28, 2010 8:49 pm
Location:

Re: Anyone use Trend brand lifters?

Post by BlitzA64 »

Anything I can get in Trend that I use I get from them. Very nice products
Top
Post Reply

Return to “Engine Tech”