On hold for a bit. The tax man ate my pistons and rings! LOL
Real Budget Vortec Engine build
Moderator: Team
- af2
- Guru
- Posts: 7014
- Joined: Sun Jan 28, 2007 4:42 pm
- Location: Grass Valley, CA :Northern Foothills
Re: Real Budget Vortec Engine build
GURU is only a name.
Adam
Adam
Re: Real Budget Vortec Engine build
Hope it gives him indigestion!
Felix, qui potuit rerum cognscere causas.
Happy is he who can discover the cause of things.
Happy is he who can discover the cause of things.
Re: Real Budget Vortec Engine build
Finishing up project "DALE" for my buddies son Brenden. Been a real budget deal, interested to see how it dyno's. Should be on in the next week or two. Assembled the heads with him in the kitchen last night, too cold outside BURRRRRR
You do not have the required permissions to view the files attached to this post.
-
- New Member
- Posts: 33
- Joined: Mon May 21, 2012 4:30 pm
- Location: Alabama
Re: Real Budget Vortec Engine build
“Pure logical thinking cannot yield us any knowledge of the empirical world; all knowledge of reality starts from experience and ends in it.”
Albert Einstein
Albert Einstein
-
- New Member
- Posts: 44
- Joined: Mon Feb 11, 2019 12:03 pm
- Location:
Re: Real Budget Vortec Engine build
You do not have the required permissions to view the files attached to this post.
Re: Real Budget Vortec Engine build
Also for anyone that may be interested. In regards to the retainer to seal issue so spoken about on stock vortecs. This set had .620 between retainer and seal at 1.800-standard height valve lock, beehive retainer 787 Comp.
-
- Guru
- Posts: 2276
- Joined: Wed Jul 27, 2011 5:22 am
- Location: brisbane AUSTRALIA
Re: Real Budget Vortec Engine build
Nice clean assembly, good job, maybe Sumtingwong believes a burr finish will up your HP, or a cam LSA change that might drop TQ by 15ft lbs but gain 100 HP, lolCGT wrote: ↑Wed Feb 27, 2019 10:30 am Resized_20190226_221636_001.jpgResized_20190226_221628.jpgResized_20190225_211611.jpg
Finishing up project "DALE" for my buddies son Brenden. Been a real budget deal, interested to see how it dyno's. Should be on in the next week or two. Assembled the heads with him in the kitchen last night, too cold outside BURRRRRR
Tom
-
- New Member
- Posts: 33
- Joined: Mon May 21, 2012 4:30 pm
- Location: Alabama
Re: Real Budget Vortec Engine build
My initial guess was with zero porting after looking closely at your kitchen pics and noticing the intake ports
I'm going to say 438 hp 420 tq.
I'm going to say 438 hp 420 tq.