600+HP with a FT cam, 355 cubes & OEM iron heads
Moderator: Team
-
- Guru
- Posts: 2690
- Joined: Fri Jan 09, 2009 8:51 pm
- Location: Australia
Re: 600+HP with a FT cam, 355 cubes & OEM iron heads
Valves are just 11/32 steel ferria.
Manley TS retainers, pac springs - 160lb on the seat, edm lifters, around 500lb over the nose.
Regular cam, just broken in carefully with plenty of zinc & the inner springs removed.
No bsfc's, only really hook up the fuel flow for r&d, when you have no intention of changing anything internal in the engine bsfc is kinda moot.
Manley TS retainers, pac springs - 160lb on the seat, edm lifters, around 500lb over the nose.
Regular cam, just broken in carefully with plenty of zinc & the inner springs removed.
No bsfc's, only really hook up the fuel flow for r&d, when you have no intention of changing anything internal in the engine bsfc is kinda moot.