Sc1 2868 intake
Moderator: Team
Sc1 2868 intake
Has anyone or does anyone know if you can cut the 2868 to fit 9.2 deck. Approximately.150 a side. Pads look quite thick. Thanks.
Re: Sc1 2868 intake
Have you given a thought to use a CID BE 5.0 SCI intake, it has a really thick flange and lots of material to possibly get a good port match. they do one for a 9.25" deck. Just a thought.
The Older I Get, The Dumber I Get
Re: Sc1 2868 intake
I have not looked at it before. Yes very thick pad would cut easily to 9.2 by looks
Re: Sc1 2868 intake
You might want to check on 351c.net on Facebook seems like I saw that intake on a cleveland over there.
Re: Sc1 2868 intake
Doesn't sound like anyone has modded the 2868. Trying to fit to blue thunder 3.6. Some have done similar intakes by cutting plenum and narrowing. The sc1 and 4.3 blue thunder look to be 4.3 inch high so almost a inch higher which makes for quite abit wider. Scott cook air supremacy maybe the closest.It maybe a good thing son apprenticing for machinist.