Need help to ID Scorpion Roller Rockers
Moderator: Team
- BrazilianZ28Camaro
- Guru
- Posts: 3939
- Joined: Mon Feb 09, 2009 10:52 pm
- Location:
Need help to ID Scorpion Roller Rockers
Hello Fellas
Buddy just sent me parts for his new 350 Chevy, I'm identifyin the parts he got, but I can't find what Scorpion rockers I have here by the PN because it isn't in there web catalog.
Looks to be a discontinued BBC 1.7 rocker, but they are brand new.
I'm wondering if somebody might have an Old Scorpion catalog to ID these #10003530 1.7 ratio RR and can help me on this.
Thanks in advance.
Diego
Buddy just sent me parts for his new 350 Chevy, I'm identifyin the parts he got, but I can't find what Scorpion rockers I have here by the PN because it isn't in there web catalog.
Looks to be a discontinued BBC 1.7 rocker, but they are brand new.
I'm wondering if somebody might have an Old Scorpion catalog to ID these #10003530 1.7 ratio RR and can help me on this.
Thanks in advance.
Diego
'71 Z28 street strip car
Pump gas All motor SBC 427
3308 lbs-29x10.5 Hoosiers
NEW BEST ET
1.38 60' / 4.05 330' / 6.32@111.25mph
https://www.youtube.com/watch?v=99p13UK ... ture=share
Pump gas All motor SBC 427
3308 lbs-29x10.5 Hoosiers
NEW BEST ET
1.38 60' / 4.05 330' / 6.32@111.25mph
https://www.youtube.com/watch?v=99p13UK ... ture=share
Re: Need help to ID Scorpion Roller Rockers
I could not find such a part number either, Diego. So I e-mailed Scorpion and asked for particulars. Will let you know what they say.
http://www.scorpionracingproducts.com/contact-us.html
A very Happy Easter to you and yours,
Harry
http://www.scorpionracingproducts.com/contact-us.html
A very Happy Easter to you and yours,
Harry
- BrazilianZ28Camaro
- Guru
- Posts: 3939
- Joined: Mon Feb 09, 2009 10:52 pm
- Location:
Re: Need help to ID Scorpion Roller Rockers
Thank you very much Harry.enigma57 wrote: ↑Sat Apr 20, 2019 6:37 am I could not find such a part number either, Diego. So I e-mailed Scorpion and asked for particulars. Will let you know what they say.
http://www.scorpionracingproducts.com/contact-us.html
A very Happy Easter to you and yours,
Harry
'71 Z28 street strip car
Pump gas All motor SBC 427
3308 lbs-29x10.5 Hoosiers
NEW BEST ET
1.38 60' / 4.05 330' / 6.32@111.25mph
https://www.youtube.com/watch?v=99p13UK ... ture=share
Pump gas All motor SBC 427
3308 lbs-29x10.5 Hoosiers
NEW BEST ET
1.38 60' / 4.05 330' / 6.32@111.25mph
https://www.youtube.com/watch?v=99p13UK ... ture=share
Re: Need help to ID Scorpion Roller Rockers
Diego, no response from Scorpion thus far. Still looking. Will let you know as soon as I have information. Current 3500 series rockers seem to be mainly for endurance racing, but no reference as yet to exact part number you posted..
Best regards,
Harry
Best regards,
Harry
- BrazilianZ28Camaro
- Guru
- Posts: 3939
- Joined: Mon Feb 09, 2009 10:52 pm
- Location:
Re: Need help to ID Scorpion Roller Rockers
Ok, thank you very much for the update!
'71 Z28 street strip car
Pump gas All motor SBC 427
3308 lbs-29x10.5 Hoosiers
NEW BEST ET
1.38 60' / 4.05 330' / 6.32@111.25mph
https://www.youtube.com/watch?v=99p13UK ... ture=share
Pump gas All motor SBC 427
3308 lbs-29x10.5 Hoosiers
NEW BEST ET
1.38 60' / 4.05 330' / 6.32@111.25mph
https://www.youtube.com/watch?v=99p13UK ... ture=share
- BrazilianZ28Camaro
- Guru
- Posts: 3939
- Joined: Mon Feb 09, 2009 10:52 pm
- Location:
Re: Need help to ID Scorpion Roller Rockers
Ok, thank you very much for the update!
'71 Z28 street strip car
Pump gas All motor SBC 427
3308 lbs-29x10.5 Hoosiers
NEW BEST ET
1.38 60' / 4.05 330' / 6.32@111.25mph
https://www.youtube.com/watch?v=99p13UK ... ture=share
Pump gas All motor SBC 427
3308 lbs-29x10.5 Hoosiers
NEW BEST ET
1.38 60' / 4.05 330' / 6.32@111.25mph
https://www.youtube.com/watch?v=99p13UK ... ture=share
Re: Need help to ID Scorpion Roller Rockers
Diego, I managed to reach Scorpion's tech person by phone just now. The rockers you have are 1.7 ratio for small block Chevy. They did not know whether they are for the #1026 (7/16") or the #1025 (3/8") rocker stud, but you will be able to measure them and tell.
Hope this helps,
Harry
Hope this helps,
Harry
- BrazilianZ28Camaro
- Guru
- Posts: 3939
- Joined: Mon Feb 09, 2009 10:52 pm
- Location:
Re: Need help to ID Scorpion Roller Rockers
Thank you very much again Harry, this certainly helps.enigma57 wrote: ↑Tue Apr 30, 2019 3:39 pm Diego, I managed to reach Scorpion's tech person by phone just now. The rockers you have are 1.7 ratio for small block Chevy. They did not know whether they are for the #1026 (7/16") or the #1025 (3/8") rocker stud, but you will be able to measure them and tell.
Hope this helps,
Harry
I bet you're a lot better spelling at the phone than me!
'71 Z28 street strip car
Pump gas All motor SBC 427
3308 lbs-29x10.5 Hoosiers
NEW BEST ET
1.38 60' / 4.05 330' / 6.32@111.25mph
https://www.youtube.com/watch?v=99p13UK ... ture=share
Pump gas All motor SBC 427
3308 lbs-29x10.5 Hoosiers
NEW BEST ET
1.38 60' / 4.05 330' / 6.32@111.25mph
https://www.youtube.com/watch?v=99p13UK ... ture=share
Re: Need help to ID Scorpion Roller Rockers
Glad to be able to help, Diego!
Best regards,
Harry
P.S. >>> I don't have a cell phone, so do not text. Yes, I still have my rotary dial phone here at home (land line).
Best regards,
Harry
P.S. >>> I don't have a cell phone, so do not text. Yes, I still have my rotary dial phone here at home (land line).
- ScorpionRacing
- New Member
- Posts: 6
- Joined: Mon Jul 09, 2018 7:04 am
- Location:
- Contact:
Re: Need help to ID Scorpion Roller Rockers
Gentleman, it always puzzles me that people go to a forum to look for answers about a manufacturer's product. Here's a quick thought...Contact the manufacturer! I am the General Manager of Scorpion Racing Products. Occasionally I look through forums to see if there are any issues with our products that I need to be aware of. It amazes me how much wrong information gets pushed through these forums. If you want answers regarding any of Scorpion's products, I encourage you to contact us directly so that you are not fed false information. If you come to a general forum and ask or share your concern's that there may be a manufacturing issue, you are talking to the wrong people. Scorpion is very proud of our products and every single one is manufactured right here in Ocala, FL. All components of our rocker arms are made 100% in the USA. That includes the extruded aluminum, clips, trunnions, bearings, seats, ...every piece. No Chinese junk will ever enter Scorpion's facility! We want to hear from you. If you think there is a manufacturing issue, let us know. Because a forum is sure not going to correct it. Email me personally if you like. We also have a top notch tech support department with over 100 years combined experience. You can go to our website, our Facebook site or simply email us directly. I have provided appropriate links below.
http://www.scorpionracingproducts.com/contact-us.html
techsupport@scorpionracingproducts.com
Chuck@scorpionracingproducts.com Chuck Layton, General Manager
Info@scorpionracingproducts.com Questions about part numbers, fitment, etc.
https://www.facebook.com/ScorpionRacingProducts/
(352) 512-0800 ask for Tech Support (Norm Akins, Manager Tech Support)
http://www.scorpionracingproducts.com/contact-us.html
techsupport@scorpionracingproducts.com
Chuck@scorpionracingproducts.com Chuck Layton, General Manager
Info@scorpionracingproducts.com Questions about part numbers, fitment, etc.
https://www.facebook.com/ScorpionRacingProducts/
(352) 512-0800 ask for Tech Support (Norm Akins, Manager Tech Support)
Chuck Layton
General Manager
Scorpion Racing Products
General Manager
Scorpion Racing Products