Custom pistons, which brand & How much???

la360 · Post by **la360** » Wed Feb 02, 2005 6:48 am

4.03" bore, 0.043" top & second ring, 3mm oil ring, 1.175" compression height, verticle gas porting, Ultra lite design, 14.5:1 with 55cc open chamber. What should I be looking at brand wise, and any recommendations on where to buy them from, It's a 360 Mopar, have Flat top Venolia's in it at the moment, 4.02" that weigh 400 grams
Thanks
AL...

joe · Post by **joe** » Wed Feb 02, 2005 10:59 am

cp, they seal up very tightly .

tk · Post by tk » Wed Feb 02, 2005 8:40 pm

la360 wrote:4.03" bore, 0.043" top & second ring, 3mm oil ring, 1.175" compression height, verticle gas porting, Ultra lite design, 14.5:1 with 55cc open chamber. What should I be looking at brand wise, and any recommendations on where to buy them from, It's a 360 Mopar, have Flat top Venolia's in it at the moment, 4.02" that weigh 400 grams
Thanks
AL...

Can't go wrong with CP or JE

Trev · Post by **Trev** » Thu Feb 03, 2005 1:30 am

Hi LA 360

I have just ordered a set of Custom CPs, I have heard nothing but good reports from there and the staff at CP responded to my e-mails promptly.
The CPs cost me 1500 Aussie dollars with any ring package I wanted
Not like Probe responses

idunno · Post by **idunno** » Thu Feb 03, 2005 1:53 pm

JE just pounded me out a set of 360 pistons for a 4" stroke inverted dome custom oversize pin fitted in less than 2 weeks.Got then yesterday.Cant go wrong with that

Don Terrill’s Speed-Talk

Custom pistons, which brand & How much???

Custom pistons, which brand & How much???

Re: Custom pistons, which brand & How much???

CP PISTONS