I´ve been offered to by a Chevy 383 stroker engine, that´s been recently imported to Sweden (where I live).
It is supposed to have been pro built in the U.S, with all new parts in it, and give 450+ hp.
No carb ,but an Edelbrock Performer EPS intake manifold.
The heads are cast iron Pro Topline Torker heads, 223-6720 167T.
One head is marked 223-6720 167T F3953 02 03, and the other 223-6720 167T F4767 03 03.
Right and left, or what?
Living in Sweden, shops around here have little or no knowledge about these heads.
I´ve found out that they have 167cc runners, 67cc chambers and 2.020 intake.
I don´t know what cam it has, but I´m trying to find out who built it, so can get the specs on it.
Is it possible to get that amount of power out of this engine with these heads?
I´m really interested in this engine, but some people I´ve talked to, have doubt´s that it can perform 450 + horsepowers with the PTL Torker heads.
Need some advice here
383 with Pro Topline Torker heads
Moderator: Team
-
- Guru
- Posts: 5566
- Joined: Sun Feb 19, 2006 10:19 am
- Location: MA
- jmarkaudio
- Vendor
- Posts: 4222
- Joined: Wed Sep 26, 2007 11:26 am
- Location: Florida
Be leary unless you can find out exactly who built it. There a lot of wannabe pro's in this country as well as being sure if it was built here. Call or write to be able to confirm how to ID if they built it. If it seems to be a great deal on the price, it may end up being a bad one.
Mark Whitener
www.racingfuelsystems.com
____
Good work isn't cheap and cheap work can't be good.
www.racingfuelsystems.com
____
Good work isn't cheap and cheap work can't be good.