Page 1 of 1
Valve covers
Posted: Fri Apr 08, 2005 12:03 pm
by Mike Rogers
I know this is not the place for this but i need a set of sbc cast alumnium valve covers from an 18 deg engine either with the chevy logo or not with spring oilers for jesel shaft rockers no breathers can have spot for oil fill or bleed off valve.I need them for the hooters enging i,am building.
Re: Valve covers
Posted: Fri Apr 08, 2005 10:46 pm
by Wolfplace
Mike Rogers wrote:I know this is not the place for this but i need a set of sbc cast alumnium valve covers from an 18 deg engine either with the chevy logo or not with spring oilers for jesel shaft rockers no breathers can have spot for oil fill or bleed off valve.I need them for the hooters enging i,am building.
=
Mike,
I think I've got a set.
email me & I will see if I can get a pic of them to you to see if they will work.
If I remember they had quick fasteners welded to them for header heat shields but I gotta look,,