motor plates..crankshaft centerline

Shocks, Springs, Brakes, Frame, Body Work, etc

Moderator: Team

Post Reply
ric3529
Member
Member
Posts: 94
Joined: Sun Oct 26, 2008 8:33 am
Location:

motor plates..crankshaft centerline

Post by ric3529 »

Im replaceing front and rear motor plates on my tube chassis vega...I need to know, if I set the distance from the centerline of the crank at say 12 " at what distance (from the floor, same as the crank) would i set the rear trans out put shaft,the same 12 " ?? or wwould i set it lower? I dont know what they were set before as i bought the car with out the motor plate (SBC) Thanks Ric
Post Reply