Lowering change pinion angle?

Shocks, Springs, Brakes, Frame, Body Work, etc

Moderator: Team

Post Reply
cuisinartvette
Guru
Guru
Posts: 1367
Joined: Fri Sep 05, 2008 11:39 pm
Location: Valencia Ca

Lowering change pinion angle?

Post by cuisinartvette » Thu Sep 26, 2013 10:07 am

67 a body
Lowered with 1" drop Hotchkiss springs
Front still sits a little lower than front want it level
If I drop the rear an inch will it change much? (angle)
Just dropping the body down not the frame correct ?Or?

Asking as my trans just kisses the top of the tunnel in a spot or two dont want to make another tunnel or have to change major things. I do have 3 mount points for the upper control arms in rear they are on the middle mount now.

Opinions?

Post Reply