g-body-Low Drag front brake calipers HELP!

Shocks, Springs, Brakes, Frame, Body Work, etc

Moderator: Team

Post Reply
598 BIG RAT
Member
Member
Posts: 92
Joined: Thu Feb 07, 2013 8:00 pm
Location: NW Oklahoma City
Contact:

g-body-Low Drag front brake calipers HELP!

Post by 598 BIG RAT » Mon Jun 22, 2015 2:50 pm

I am currently changing my brakes from a boosted brake system to a Manuel system on my 1979 malibu and i have heard that the low drag front calipers brakes dont work to well. I am also going to install wilwood 4 piston calipers on the rear.
Do i need to change the front calipers?
Will the manuel M/C that has a small bore (7/8 I think) be efficient?
This is a high H/P car and the brakes need to stop efficiently.
The main question is the low drag calipers.
R.C.

cjperformance
Guru
Guru
Posts: 2491
Joined: Tue Aug 19, 2008 7:20 am
Location: South Australia

Re: g-body-Low Drag front brake calipers HELP!

Post by cjperformance » Wed Jun 24, 2015 7:46 am

The 7/8" m-cyl will work well with around a 6.8:1 pedal ratio.
What piston diameter front calipers are you using?
Craig.

pitts64
Member
Member
Posts: 91
Joined: Mon Oct 15, 2007 8:00 am
Location: Pittsburgh, Pa.

Re: g-body-Low Drag front brake calipers HELP!

Post by pitts64 » Sat Jun 27, 2015 8:30 am

Try adding and removing alignment shims to the top bolt on the caliper bracket at the spindle and then spin the rotor.. If you have a hat rotor you will need to put a couple lugs on to secure it.. I just found out the other day this can be adjusted to help the rotors spin freely..

I have after market Scarebird disc brake brackets, not sure if that makes a difference or not but after shimming the top bolt behind the bracket, my rotors spin freely and my car handles and coasts like a different car..

F-BIRD'88
Guru
Guru
Posts: 5657
Joined: Tue Mar 27, 2007 6:56 pm
Location: Ontario, Canada

Re: g-body-Low Drag front brake calipers HELP!

Post by F-BIRD'88 » Thu Jul 30, 2015 1:52 pm

All GM G body and F body cars, from disc brakes:

If the front brake calipers are not releasing, too much drag, check and change the hyd flex hose. Big difference. They degrade inside over time and do not allow the hyd pressure to release when you are off the brake pedl. Use high quality hyd flex hoses.

Post Reply