Has anyone ever notched the rear frame on 2nd generation camaros and welded sliders in place?
I have caltrac split leafsprings 1500+hp
Caltrac bars, double adjustable shocks, anti roll bar, strange rearend. I need to lower the car 3"to 4"
In the rear and this is the only way I see of accomplishing this goal. Caltrac does not recommend more the 1.5" of lowering blocks, so using 3" lowering blocks is out of the question. ..
Shocks, Springs, Brakes, Frame, Body Work, etc
1 post • Page 1 of 1