Pavement Late Model Ideas

Racer Roy · Post by **Racer Roy** » Mon Feb 05, 2007 9:54 am

Good morning everyone:
Now that we have decided to move up to a late model class, my head is full of questions about these cars.
I have been racing an IMCA mod, but never a (heavier) car like these.
I am reading about the BBSS deal and what it takes to make that setup work. My questions concern the rear.
What is the hot three link setup to go with the BBSS and still get as much drive off as possible? 2800lbs, 355CID, 1/4 mile slightly banked paved, no real restrictions on suspension designs.
Thanks for the suggestions

RR

Racer Roy · Post by **Racer Roy** » Wed Feb 14, 2007 12:24 pm

Good morning, racers:
Well the car is home, time to get busy!
A simple question today..
Is anyone making monoball upper ball joints to fit screw in control arms, or will I have to replace the arms to get this feature? (a quick search found nothing)
Thanks

RR

fast_crew · Post by **fast_crew** » Wed Feb 14, 2007 7:16 pm

Racer Roy sorry to redirect you but you may want to try, thedirtforum.com , and also try 4m.net forum, And http://www.auto-ware.com/autoware-bin/tech.pl WAR board. Lots of circle track info there. Oh and the Racingwest.com message board.

Hope this helps

Racer Roy · Post by **Racer Roy** » Thu Feb 15, 2007 12:17 am

That does help, thanks

RR