Shocks, Springs, Brakes, Frame, Body Work, etc
Moderator: Team
fabman
Post
by fabman » Tue Sep 25, 2007 1:59 am
looking for creative glas works body or the mold or a phone ????number thanks guys
Ed-vancedEngines
Post
by Ed-vancedEngines » Tue Sep 25, 2007 3:56 am
If you are talking about Buiese (?) Creative Glassworks, reports are this his operation hs gone down hill. I have no first hand experience with them or their products though.
In Houston Tx I believe that Ballistic (Shane Heckel is a dealer for them.
Also in Houston area there was a bad to the bone I think 1952 Chevy Pro Mod car for sale.
If you wish I will get phone numbers and/or names.
Ed
fabman
Post
by fabman » Tue Sep 25, 2007 11:36 am
thats the one i would like the phone # if its ok...thanks so much for your help
Mark R
Member
Posts: 188 Joined: Sun Jan 22, 2006 6:05 pm
Location: Huntington Beach, Ca
Contact:
Post
by Mark R » Tue Sep 25, 2007 11:39 am
Go to pscaracing.com and put up a post for Jimmy Mock, he just built a 50 Chevy Pro street car that is very cool. Jimmy might be able to help you out. If you don't know, Pro Street is basicly the same as Pro Mod. Good luck!
2006 PSCA Mean Street Champion
rappracingengines.com
fabman
Post
by fabman » Tue Sep 25, 2007 11:56 am
thanks mark who made that one???
Mark R
Member
Posts: 188 Joined: Sun Jan 22, 2006 6:05 pm
Location: Huntington Beach, Ca
Contact:
Post
by Mark R » Tue Sep 25, 2007 1:43 pm
Not sure who made it, but I know Jimmy could tell ya.
2006 PSCA Mean Street Champion
rappracingengines.com
fabman
Post
by fabman » Tue Sep 25, 2007 8:07 pm
mark thanks for you help... can you call him or can i have his number????
Mark R
Member
Posts: 188 Joined: Sun Jan 22, 2006 6:05 pm
Location: Huntington Beach, Ca
Contact:
Post
by Mark R » Tue Sep 25, 2007 8:23 pm
Fabman, I put a post on the PSCA message board for Jimmy, I'll let ya know when I hear from him.
2006 PSCA Mean Street Champion
rappracingengines.com
fabman
Post
by fabman » Tue Sep 25, 2007 9:29 pm
thanks mark
Mark R
Member
Posts: 188 Joined: Sun Jan 22, 2006 6:05 pm
Location: Huntington Beach, Ca
Contact:
Post
by Mark R » Wed Sep 26, 2007 9:39 pm
Fabman,
Jimmy is working on making a mold for the body, give him a call, 714-719-9821. Tell him ya got his number from me. Good luck!
2006 PSCA Mean Street Champion
rappracingengines.com
fabman
Post
by fabman » Wed Sep 26, 2007 11:19 pm
thank mark
Mark R
Member
Posts: 188 Joined: Sun Jan 22, 2006 6:05 pm
Location: Huntington Beach, Ca
Contact:
Post
by Mark R » Thu Sep 27, 2007 1:24 pm
You're welcome! I hope you get the body you're looking for and be sure to keep me updated. (pics would be cool)
2006 PSCA Mean Street Champion
rappracingengines.com