i have a chevy caprice wagon
that i would like to put a prepared dodge 83/4 rear from my 78 malibu
that i now run a 4 link system
the dodge 8 3/4 rear was set up
with stock suspension bracketry for g body frame
is the gm suspension for both frames the same?
what will i have to change to make rear work in wagon
caprice suspension
Moderator: Team
caprice suspension
if from now on you blame anything on anybody
it might be the alien spores from the meteors...
http://www.wallaceracing.com/Calculators.htm
it might be the alien spores from the meteors...
http://www.wallaceracing.com/Calculators.htm
-
- Expert
- Posts: 776
- Joined: Mon Nov 26, 2007 11:44 pm
- Location:
chevy 8.5 will not hold with any real torque #s
remember it is a big weight and big block tq
the rear is 3 in narrower[at 52 1/2] than the 8.5 and ears remain same but lower arms locator moved out ward from what i understand from other forum
might just back half the wagon
remember it is a big weight and big block tq
the rear is 3 in narrower[at 52 1/2] than the 8.5 and ears remain same but lower arms locator moved out ward from what i understand from other forum
might just back half the wagon
if from now on you blame anything on anybody
it might be the alien spores from the meteors...
http://www.wallaceracing.com/Calculators.htm
it might be the alien spores from the meteors...
http://www.wallaceracing.com/Calculators.htm