Hi,
I'll be building an LT1 circle track motor soon and am new to Tucson so am asking for recomendations as to a good race engine oriented machine shop in Tucson.
Feel free to pm me at clarke1 at znet.com, If you would rather.
I would appreciate info, good or bad.
Thanks,
Dan
Machine shop in Tucson?
Moderator: Team
-
- New Member
- Posts: 14
- Joined: Thu Jul 09, 2015 4:14 pm
- Location:
Re: Machine shop in Tucson?
Mike Criss engine and machine on E. Michigan st. Good guy, good equipment(no CNC) and shop is spotless. Mid town near I-10.
Speedbump
"If it was easy, everybody would do it."
"If it was easy, everybody would do it."
-
- Guru
- Posts: 1045
- Joined: Mon Aug 07, 2006 10:31 am
- Location: usa
- Contact:
Re: Machine shop in Tucson?
Dan Clarke wrote:Hi,
I'll be building an LT1 circle track motor soon and am new to Tucson so am asking for recomendations as to a good race engine oriented machine shop in Tucson.
Feel free to pm me at clarke1 at znet.com, If you would rather.
I would appreciate info, good or bad.
Thanks,
Dan
Try calling Don's Hot Rod Shop or Townsends Racing Works.....Both have been in business for decades in Tucson.....Either can probably steer you in the right direction....Good Luck!!...Dan.
Re: Machine shop in Tucson?
Townsends has been out of business for quite a few years. Frank passed on two or three years ago. Don's is still in business. Good guys and probably have a better handle on the hot rod business than anyone else in town. They don't do machine work so any recommendation would be unbiased. I didn't know about Mike Criss.
Speedbump
"If it was easy, everybody would do it."
"If it was easy, everybody would do it."