Transmission to Rear-end
4 posts • Page 1 of 1
- Posts: 468
- Joined: Fri May 11, 2012 8:38 am
Has anyone ever seen a GM 7.5 with no shim at all on the pinion. Got a 79 Buick That I am swapping the gears out on and when I pressed the old bearing off to reuse the shim it did not have one.My new gear is looking like it will take a .038 shim. All the ones that I have done in the past have always been real close to needing the original shim.It had factory 3.08 gears in it. I am replacing with Richmond 3.42.