Bert Gen 2 problems

Transmission to Rear-end

Moderator: Team

Post Reply
mhutchison36
New Member
New Member
Posts: 3
Joined: Wed Feb 11, 2015 10:19 pm

Bert Gen 2 problems

Post by mhutchison36 » Mon May 25, 2015 9:36 am

This is the first time I have used a 2 speed transmission before and seem to be having some issues. I am racing a modified and placed a bert gen 2 (brand new) in the car. I am using a single lever shifter. When the car is off I move through the gears with reasonable force applied to the shifter however once the car is running I get into reverse and can't get it back to low. It takes so much force that I end up skipping right through low and straight into high. Currently I shut the car down and shift back into low. Getting from low to high has not been an issue but getting high back into low seems impossible. We bled the system correctly and have the shifter linkage in virtually a straight line. I have not attempted to move the heim connected to the shifter down yet. Getting from high to low concerns me more than the reverse issue since I see this presenting a safety issue. Like I said this is my first experience running a transmission like this and need some help.

Post Reply