Page 1 of 1

c-clip eliminators

Posted: Thu Sep 29, 2016 7:56 am
by Kbails
hey recently picked up a 10 bolt rear with new strange 33 spline ''pro race'' axles and there a1100 elimininator kit. the eliminators were already pressed on the axles, I want to know if I can find replacement bearings or if I have to just buy a new kit.. I have tracked down moser replacments but they are not the same, no luck with the strange ones.

Re: c-clip eliminators

Posted: Sun Oct 02, 2016 5:15 pm
by Pontiac_Puller
If you have the measurements a replacement could be found. There's only a few bearings made in that style, one of them is bound to be right.