Oddball 5-speed to T-case question

Transmission to Rear-end

Moderator: Team

Post Reply
RevTheory
Guru
Guru
Posts: 3855
Joined: Thu Sep 04, 2014 6:45 am

Oddball 5-speed to T-case question

Post by RevTheory » Wed Nov 08, 2017 10:28 am

I have a wild hair that I'm not sure is even possible but would be super badass if it works. Do you guys know if a close-ratio 5-speed stick from say a Camaro can be adapted to join a transfer case for installation in a Jeep CJ-7?

All of the common transmission swaps use old truck sticks and shift like a school bus with a near useless granny 1st.

autogear
Pro
Pro
Posts: 453
Joined: Thu Dec 08, 2011 9:03 am

Re: Oddball 5-speed to T-case question

Post by autogear » Wed Nov 08, 2017 2:25 pm

I'll ask my boss, but I do know the Jeep T5 has the granny gear for the 4-banger. These were factory adapted to the dana 300 T-case
You'd probably need the entire shifter and internal linkage from a jeep T5 to convert the camaro box to forward shift. Additionally, the camaro box is mounted tipped to one side 15* towards the driver, which means I doubt the mounting foot is correctly oriented for a traditional crossmember. Dont forget the early 80s 4L was torquey to kill the Jeep 4:1 1st NWC trans.

Ed Hartnett in Lansdowne PA did a lot of customized T5's; he may have some ideas. 610-623-9381 Tell him Nathan from Auto Gear sent you.

RevTheory
Guru
Guru
Posts: 3855
Joined: Thu Sep 04, 2014 6:45 am

Re: Oddball 5-speed to T-case question

Post by RevTheory » Wed Nov 08, 2017 6:22 pm

Thanks, man. I'll give him a call when I get a chance.

RevTheory
Guru
Guru
Posts: 3855
Joined: Thu Sep 04, 2014 6:45 am

Re: Oddball 5-speed to T-case question

Post by RevTheory » Thu Nov 09, 2017 10:07 am

I wonder if trying to hang a t-case off the back of a Muncie 4-speed would be an easier deal :-k

autogear
Pro
Pro
Posts: 453
Joined: Thu Dec 08, 2011 9:03 am

Re: Oddball 5-speed to T-case question

Post by autogear » Thu Nov 09, 2017 4:29 pm

Advance Adapters has a kit. Or they used to. We've built them for customers. Its a special mainshaft and tailhsg for the Muncie. We've almost always done them with our 2.98 1st gear on the rockcrusher platform.

The other road might be to get a Jeep T5, and put a factory replacement 2.95 camaro non-WC gearset in it. Let me know what Ed says.

RevTheory
Guru
Guru
Posts: 3855
Joined: Thu Sep 04, 2014 6:45 am

Re: Oddball 5-speed to T-case question

Post by RevTheory » Thu Nov 09, 2017 6:20 pm

Sounds good. Will do!

xr4x4ti
Member
Member
Posts: 53
Joined: Wed Jan 23, 2013 1:20 pm
Location: Minnesota

Re: Oddball 5-speed to T-case question

Post by xr4x4ti » Fri Nov 10, 2017 12:49 pm

I would use the case from a Jeep AX-15 transmission with the gears from the Toyota Supra version the R154 that came in the late 80's Supra Turbo's.

Tim

SupStk
Guru
Guru
Posts: 1290
Joined: Wed Jun 22, 2005 6:25 pm
Location: Box Elder, SD

Re: Oddball 5-speed to T-case question

Post by SupStk » Mon Dec 11, 2017 5:42 pm

I have a new Advance Adaptors Muncie to Jeep transfer case conversion if interested.
On the T-5 that was a factory deal. If you want to lose the 4.05 low gear, 3.35 or 2.95 low gear sets can be swapped. Need to keep it world class or non world class depending on the tranny case you are using.
Monty Frerichs
B&M Machine

GLHS60
Pro
Pro
Posts: 446
Joined: Fri Oct 15, 2010 1:55 am
Location: Sherwood Park, Alberta, Canada

Re: Oddball 5-speed to T-case question

Post by GLHS60 » Mon Dec 11, 2017 8:22 pm

I saw a car show on TV a while back where they converted a late model Camaro to 4x4.

The kept the 5 speed and used a late model junkyard transfer case.

I forget the name of the show unfortunately, anyone else see it ??.

I just remembered "Road Hawks"??

Thanks
Randy
Sherwood Park
Alberta,Canada

The Dark Side of Will
Expert
Expert
Posts: 556
Joined: Wed Feb 18, 2009 2:06 pm
Location: In the Darkness, where Fear and Knowing are one
Contact:

Re: Oddball 5-speed to T-case question

Post by The Dark Side of Will » Tue Dec 12, 2017 9:01 pm

You *should* be able to swap to a Jeep or Eagle T-case adapter from the original tailshaft housing and use a 23 spline output shaft from the same application in order to mount up a Jeep T-case. If your box is a WC, then you'll need to modify the Jeep output shaft to work with the WC needle bearing where the output shaft plugs into to the input shaft.

Also, the Syclone/Typhoon/Bravada T-case works with GM's normal 27 spline output.

Post Reply