Looking for 10mm diameter carbide bar

Tech questions that don't fit above forums

Moderator: Team

Post Reply
ducatisti
Member
Member
Posts: 54
Joined: Tue Sep 30, 2008 3:26 pm
Location:

Looking for 10mm diameter carbide bar

Post by ducatisti »

Looking for 10mm diameter carbide bar to make some pilots. any ideas ?

cheers
ClassicComp
Expert
Expert
Posts: 932
Joined: Mon Jan 23, 2006 10:50 pm
Location:

Post by ClassicComp »

check with Garr carbide tooling
they may have a carbide drill blank thats long enuf.
results speak for themselves
strokersix
Pro
Pro
Posts: 413
Joined: Sat Aug 23, 2008 7:12 am
Location:

Post by strokersix »

McMaster-Carr 8791A42 It's about 4" long if that's enough.
ss chief
Member
Member
Posts: 52
Joined: Fri Feb 09, 2007 10:59 pm
Location:

Post by ss chief »

axegrinder
Guru
Guru
Posts: 1094
Joined: Thu Sep 13, 2007 1:54 pm
Location: TX

Post by axegrinder »

Hydro Carbide 1 800 245 2476 ask for Judy
Post Reply