best holley or other booster for max mileage...

Tech questions that don't fit above forums

Moderator: Team

Post Reply
sc2dave
Expert
Expert
Posts: 635
Joined: Tue May 24, 2005 10:45 pm
Location: Los Angeles, in The People's republic of Kalifornia

best holley or other booster for max mileage...

Post by sc2dave »

I'm running a 350cfm 2bbl and i want to change out the boosters for some that will give me the most bottom end,and save me fuel.Any recommendations?
sc2dave
Expert
Expert
Posts: 635
Joined: Tue May 24, 2005 10:45 pm
Location: Los Angeles, in The People's republic of Kalifornia

Post by sc2dave »

anyone?
Ted
Member
Member
Posts: 56
Joined: Fri Jul 03, 2009 3:04 pm
Location: Central Texas
Contact:

Post by Ted »

I've been installing annular discharge nozzles in the primary side of 600 cfm Holleys for better lowend response where larger cams are being used. I don't see why these couldn't be used for both better atomization and downsizing of the two barrel carbs for better effieciency also.
Ted Eaton
Ron Miller
Pro
Pro
Posts: 448
Joined: Tue Jun 21, 2005 1:41 pm
Location:

Re: best holley or other booster for max mileage...

Post by Ron Miller »

sc2dave wrote:I'm running a 350cfm 2bbl and i want to change out the boosters for some that will give me the most bottom end,and save me fuel.Any recommendations?
Don't count out a Good Q-Jet. It will give you best of both Worlds.
Ron Miller
BirdMan
Expert
Expert
Posts: 627
Joined: Mon Jan 19, 2009 11:19 am
Location: Topeka, KS

Post by BirdMan »

Holley used to sell these under the 'Economizer Series' years ago.
Dale C.
Post Reply