sbc exhaust

Tech questions that don't fit above forums

Moderator: Team

Post Reply
teamdirt

sbc exhaust

Post by teamdirt » Tue Jan 31, 2006 2:25 am

i will be running a 85 monte witha 305 sbc purestock on a dirt track, i am looking for the best flow exhaust, we can not use center dumps.. any one have some suggestions?? thanks

Team Owner

Post by Team Owner » Wed Feb 08, 2006 4:01 pm

Not enough information.

When you are talking 305 and Metric chassis you are pretty much stuck with what you have.

You might try and see if a stock exh manifold off a 1973 - 75 Chevy Truck will fit - depending on clearance of the firewall - if it doesn't one off a 74 - 76 Chevy van . Stay away from the ones that have the ports for the air tubes if possible.

If you have to use the spacer with the flap in it - just cut it out with a cutting torch and plug the hole by tapping a thread and using a bolt or else just weld it shut.

The origioinal Metric ones have a habit of breaking at the studs.

Post Reply