Page 1 of 1

Siemens / Edelbrock injector flow?

Posted: Mon Jan 10, 2011 3:49 pm
by SWR
A friend have bought himself a set of some Siemens Deka injectors, marked Edelbrock, allegedly they should be good for 500+ hp in an I4 Turbo engine. The number on them are 3528/4197q08832. Can't seem to find anything about them, not even on Edelbrock's pages. Anyone have an idea of their flow at 43.5 psi?

Re: Siemens / Edelbrock injector flow?

Posted: Wed Jan 19, 2011 5:34 pm
by jacksoni
I found this- if real answers your question but also didn't find much else though if you search the new number you get some hits.

http://forums.edelbrock.com/forums/show ... php?t=3131

Re: Siemens / Edelbrock injector flow?

Posted: Fri Jan 21, 2011 3:39 pm
by SWR
jacksoni wrote:I found this- if real answers your question but also didn't find much else though if you search the new number you get some hits.

http://forums.edelbrock.com/forums/show ... php?t=3131
Yes, thanks. I signed on there and got a reply myself the other day.. :)