Page 1 of 1

Inland Technologies solvent tank

Posted: Tue Sep 20, 2011 10:28 am
by Mmfh
Hey guys,

I'm wondering if anybody has heard of Inland Technologies, they make cleaning units, solvent tanks. I found one used for sale that seems good but I've never
heard of this brand and don't know of their quality.

This solvent tank is similar to the Safety Kleen units that sit on a barrel. I believe the SK units sit on a 30 gallon barrel, this one sits on top of a 55 gal.

The lid has a fluorescence light built into it and it has a pump and filter on the outside of the upper cleaning tray. It also has a pump inside the barrel to bring the solvent
up inside the cleaning tray. So, it has two pumps, one for the solvent nozzle, and one just for circulation of the solvent and into the filter. I've never seen one like this
and wonder if its just more stuff to go wrong.

I'm want a commercial quality unit that will not give me trouble with pumps and such.

Thanks very much!

Mm

Re: Inland Technologies solvent tank

Posted: Wed Sep 21, 2011 10:34 am
by Mmfh
Well, nobody has heard of this solvent tank I guess. I bought it anyway, brought it back to the shop and I like it.

Built in light on the upper edge of the lid, nice filter system and a high quality pump that puts out a good flow.

For future reference, these seem like a quality unit.

Mm

Re: Inland Technologies solvent tank

Posted: Thu Sep 22, 2011 7:44 pm
by ALKYAL
Please post a pic if you will and who sells them?

Re: Inland Technologies solvent tank

Posted: Tue Sep 27, 2011 12:36 am
by Mmfh
Getting a pic won't be so easy, My wife had the camera on the edge of the desk and the cat, I think, knocked it on the floor. Just paid $700 for it at Christmas time. :x

Anyway, to describe it. Its red like the Saftey Kleen ones and sits on top of a 40 gallon barrel, also red. Very large pump that hangs inside of the barrel, up about 8" above the bottom of the barrel.

On the side of the upper cleaning tray on the left is another pump and large filter afair which runs whenever the power switch is on. Power switch is on the right, on the back of the power box the light and the pump on the side plugs in to get its power.

The upper lid when closed hangs out past the outter edge of the upper cleaning tray a good 6". In this area of the lid is the 24" tube light that points down into the cleaning tray when the lid is fully open.

Very heavy duty and pump is nice and strong. Inside it has a brush and a flexible nozzle. A valve can run each on their own or both at the same time.

You can probably contact Inland on the website, I couldn't find this older model I've got but they love their new one.

Mine is used and in very good condition, I paid $100 for it.