For all the DIY home improvement guys!

Tech questions that don't fit above forums

Moderator: Team

Post Reply
ou812
HotPass
HotPass
Posts: 951
Joined: Thu Feb 10, 2005 11:23 pm
Location: SoCal
Contact:

For all the DIY home improvement guys!

Post by ou812 »

My Friend Tom is trying to market this and I have to say it's awesome and simple!
http://www.youtube.com/watch?v=03BsarPT ... ture=email
Brian Hafliger
IMM Engine & Dyno

Image
http://www.immengines.com
http://www.neilhepburn.com
JoePorting
Guru
Guru
Posts: 2997
Joined: Mon Jun 14, 2010 3:16 pm
Location: Lake Elizabeth, CA

Re: For all the DIY home improvement guys!

Post by JoePorting »

That's a pretty cool table. I like the plywood part. I do alot of plywood projects and that would come in handy. Although I like the plywood saws at Lowes and Home Depot when they're cutting straight. I usually just have them cut'em up for me. Kind of a pain since I have to bring all the measurements to Lowes when I want something cut, then the cuts are usually off by 1/8" or so. :x Kids...
Joe Facciano
rce4csh
Pro
Pro
Posts: 202
Joined: Tue Feb 12, 2008 11:24 pm
Location:

Re: For all the DIY home improvement guys!

Post by rce4csh »

Cool! Just up the road from me. I'll give him a call as I was looking into purchasing another "system" for my portable tablesaw. It is big bucks for what it is and is not nearly as flexible as this one for other uses. This one is ingenious and the ability to use the saw horse portions for other projects makes it ideal. Thanks for forwarding this information! :|
Post Reply