I'm on my 2nd wheel company and will be contacting a 3rd and don't want it to go to a 4th. The 1st weld rts, they were pretty defective and no1 seemed to care and I'm not picky, but they wobbled real bad. The 2nd centerline comp series they don't fit and hit my stock calipers even after I was assured multiple times they would fit. I just want some wheels that are lighter, quality and fit. Preferably before winter! I ordered my 1st set back in Feb.
77 corvette
Who makes good wheels?
Moderator: Team
- BOOT
- Guru
- Posts: 1423
- Joined: Fri Apr 09, 2010 6:23 pm
- Location: Michigan
Who makes good wheels?
I know as much as I can learn and try to keep an open mind to anything!
If I didn't overthink stuff I wouldn't be on speedtalk!
If I didn't overthink stuff I wouldn't be on speedtalk!
-
- New Member
- Posts: 17
- Joined: Mon Nov 10, 2008 12:55 am
- Location: Berkeley, CA
- Contact:
- BrazilianZ28Camaro
- Guru
- Posts: 3827
- Joined: Mon Feb 09, 2009 10:52 pm
Re: Who makes good wheels?
Try Bogart...
'71 Z28
Pump gas N/A SBC 427
3308 lbs-29x10.5 Hoosiers
1.45 60' / 4.12 330' / 6.38@110
https://www.facebook.com/hotcampinas/videos/1613315868736984/?hc_ref=ARSyXftkHhnl_IVpeXunYmIakvvLvnqgM2kBgK_BohRBZV7ePgTmSrC0NHPdalZq_BE&pnref=story
Pump gas N/A SBC 427
3308 lbs-29x10.5 Hoosiers
1.45 60' / 4.12 330' / 6.38@110
https://www.facebook.com/hotcampinas/videos/1613315868736984/?hc_ref=ARSyXftkHhnl_IVpeXunYmIakvvLvnqgM2kBgK_BohRBZV7ePgTmSrC0NHPdalZq_BE&pnref=story
- BOOT
- Guru
- Posts: 1423
- Joined: Fri Apr 09, 2010 6:23 pm
- Location: Michigan
Re: Who makes good wheels?
Ended up with some known to fit centerlines, I didn't buy from the manufatuer. If they sales guy wouldn't of been trying to sell me a wheel that cost more and didn't fit I'd of been happy two months ago. I didn;t want to buy centerlines after the guy wasted all my time, but they was in stock, lighter, fit and cheaper.
I know as much as I can learn and try to keep an open mind to anything!
If I didn't overthink stuff I wouldn't be on speedtalk!
If I didn't overthink stuff I wouldn't be on speedtalk!