Wanted, BBC 454 block

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
Dragsinger
Expert
Expert
Posts: 705
Joined: Mon Aug 25, 2008 9:38 pm
Location:

Wanted, BBC 454 block

Post by Dragsinger »

I am looking for a nice, standard bore, four bolt, 454 block. The ideal situation is a block that would run standard with a .001 - .002 hone.

I will also consider other BBC parts. What do you have?
Larry Woodfin - Team Woodfin Racing - Owner, Woodfin Automotive
57 Vette
New Member
New Member
Posts: 1
Joined: Wed Apr 10, 2019 8:43 pm
Location:

Re: Wanted, BBC 454 block

Post by 57 Vette »

Hi Larry,
I have a nice BBC 454 4 bolt block 0.30 over hot tanked and wrapped in plastic ready to go.
autoteacherbrian@hotmail.com
Let me know if it will work for you.
Brian
bubbabbc
Pro
Pro
Posts: 256
Joined: Sun Dec 23, 2007 9:22 am
Location:

Re: Wanted, BBC 454 block

Post by bubbabbc »

I have lotsa quality BBC parts for sale.

Skip Ohnmacht
(315) 343-6030 days
(315) 529-3398 cell

email: prtctymachine@yahoo.com

or PM me
Chip Slinger
New Member
New Member
Posts: 3
Joined: Sat Jun 01, 2019 1:01 pm
Location:

Re: Wanted, BBC 454 block

Post by Chip Slinger »

I have a very nice stock 4 bolt block, I bought it new and it only had 50k miles on it when I removed it; it was never modified in any way.

The block is still on the stock bore and looks near perfect... Should just need a hone and clean to be ready to assemble. While it was in the truck it never had a wrench touch anything other than the oil drain plug so far as I remember.
User avatar
k-star
Guru
Guru
Posts: 1918
Joined: Mon Oct 04, 2004 2:17 pm
Location: york pa

Re: Wanted, BBC 454 block

Post by k-star »

Where are you located?

I have a nice Gen 5 block that I standard bore and I believe it will clean at .0020 over, but I would need to bore gage it to make sure.


It does need a line hone.


Keith
“If I hit you with this you’re going to be numb, that’s why they call them numb-chucks “Si Robertson
Post Reply